The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium Expert to Present at Electronic Components and Technology Conference
April 25, 2022 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation Principal Engineer and Manager for Thermal Interface Materials Applications Andy Mackie, Ph.D., MSc, will share his technical expertise and insight on solder thermal interface material (TIM) processes at Electronic Components and Technology Conference (ECTC) taking place May 31-June 3, in San Diego, California, U.S.
For decades, reflowed indium metal has been the standard for solder TIMs (sTIMs) in most high-performance computing (HPC) TIM1 applications. In his presentation, Optimizing Reflowed Solder TIM (sTIM) Processes for Emerging Heterogeneous Integrated Packages, Dr. Mackie will examine the use of indium metal and its alloys as reflowed sTIMs in both CPU and GPU die-to-lid/die-to-heat spreader TIM1 applications. His presentation includes data on both vacuum and pressure (autoclave) reflow of sTIMs, which is becoming necessary to meet upcoming requirements for ultra-low voiding. He will also discuss the use of sTIMs in the context of alternative TIM applications and technologies, such as thermal greases, pads, and phase change materials, as well as liquid metals.
Dr. Mackie is an electronics industry expert with a technical background in physical chemistry, surface chemistry, rheology, semiconductor fabrication, and assembly materials and processes.
His professional experience covers all aspects of electronics manufacturing from wafer fabrication to semiconductor packaging and SMT/electronics assembly. Dr. Mackie was also responsible for the development of Indium Corporation’s first Applied Technology Roadmap. In his current role, he is focused on identifying thermal material needs and trends for various high-performance applications, as well as the development and testing of innovative solutions to meet emerging TIM requirements. Dr. Mackie has been an invited international keynote speaker and has lectured internationally on subjects ranging from sub-ppb metals analysis in supercritical carbon dioxide to solder paste rheology. He holds patents in novel polymers, heterogeneous catalysis, and solder paste formulation. He holds a Ph.D. in physical chemistry from the University of Nottingham, U.K., and a master’s of science degree in colloid and interface science from the University of Bristol, U.K.
Download The Printed Circuit Assembler’s Guide to… Solder Defects by Christopher Nash and Dr. Ronald C. Lasky. You can also view other titles in our full I-007e Book library here.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.