-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueShowing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
All About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
The Data Format Effect on Business Costs
May 9, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes

Nolan Johnson and Barry Matties talked with Axiom’s Rob Rowland and Kevin Bennett about current challenges facing EMS manufacturing. During this conversation, the pair discuss the impact of data file formats on pricing, manufacturing, and quality.
Barry Matties: Does it matter what the data format is or the data coming in?
Rob Rowland: Yes, absolutely. There are three formats we usually get from our customers: Gerber, ODB++, and IPC-2581.
Kevin Bennett: The ideal formats would be IPC-2581 or ODB++ because everything needed for programming is within one file. It only takes a couple of clicks to import those file types. The next step is to merge the bill of materials, and from that point you’re pretty much ready to export that data to the machine you’re going to program it on. But when it comes to Gerber data, which is unintelligent data, much more manual manipulation is required to get it to the same point as importing a comprehensive CAD file, like an ODB++. Gerber makes for a labor-intensive manual process. Basically, you draw a box over any given component footprint and then you must type the reference designator for each location. The extra steps make a huge difference in the time required to complete the offline programming.
Nolan Johnson: How much influence do you have over the file format your customers provide you?
Rowland: In general, we don’t have a lot of influence. Many years ago, we put together a document that articulates the differences between the three file formats and highlights the fact that we really need to get ODB++ or IPC-2581 file formats for programming. Over the years, we’ve tried to educate our customers on the extra programming effort to accurately and efficiently get the file formats right. Our customers try to accommodate our request and most of the time we get ODB++ or IPC-2581 files.
In our business, we also build boards that were designed 15 or 20 years ago and all they have are the Gerber files. As Kevin mentioned, when we do those, which might be 10% of the time, it takes Kevin and our other programmer three to four times longer to program a board with Gerber than it would if we had received either of the other two file formats.
Matties: Does your pricing change based on file format?
Rowland: Yes. If we get Gerber, we try to cover the additional cost. Programming is not an area we try to make a profit on, but we need to be able to cover our cost. If it takes us three to four times longer with a Gerber file, we need to cover the expense that we incur in doing that.
Matties: Do the customers realize that they would save money by changing the file format?
Rowland: Yes, if they’re able to, that is. We have some boards that are so old all they have are Gerber files. We work with what they have available to them. One of our engineers was on the original IPC-2581 committee and is an expert with that file format. He helped some of our customers understand the 2581 format and we showed their design groups how to output the 2581 file format.
Matties: Ultimately, it simplifies your customer’s life as well with fewer questions on the back end and so on.
Rowland: Yes, absolutely. If they give us what we need, then we don’t call them as many times, if at all, because we have what we need vs. having a lot of questions because the file format isn’t very good.
Matties: When we did a survey, Gerber was by far the one people are using most often. They’re familiar with it and there’s no significant penalty to keep using it or changing.
Rowland: Yes, I agree with you. In some cases, people don’t understand there are better file formats for programming than Gerber. Gerber files are best suited for PCB fabrication; this format was never intended for programming SMT machines. That’s why we work with our customers and try to educate them as much as we can so that we get the preferred file formats.
To read this entire conversation, which appeared in the May 2022 issue of SMT007 Magazine, click here.
Suggested Items
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
IPC-CFX, 2.0: How to Use the QPL Effectively
07/02/2025 | Chris Jorgensen, Global Electronics AssociationIn part one of this series, we discussed the new features in CFX Version 2.0 and their implications for improved inter-machine communication. But what about bringing this new functionality to the shop floor? The IPC-CFX-2591 QPL is a powerful technical resource for manufacturers seeking CFX-enabled equipment. The Qualified Product List (QPL) helps streamline equipment selection by listing models verified for CFX compliance through a robust third-party virtual qualification process.
The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
07/08/2025 | Mike Konrad -- Column: The Knowledge BaseIn electronics manufacturing, there’s a dangerous misconception that cleaning and coating are standalone options, that they operate in different lanes, and that one can compensate for the other. Let’s clear that up now. Cleaning and conformal coating are not separate decisions. They are two chapters in the same story—the story of reliability.
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.