Dan’s Biz Bookshelf: 'This Is Strategy: Make Better Plans'
The Chemical Connection: Reducing Defects in Circuit Board Production
It’s Only Common Sense: Trust Is All You Need
Keysight, Nokia Collaborate to Demonstrate the First 800 Gigabit Ethernet Readiness and Interoperability Public Test
August 4, 2022 | Business WireEstimated reading time: 2 minutes
Keysight Technologies, Inc., a leading technology company that delivers advanced design and validation solutions to help accelerate innovation to connect and secure the world, announced it has collaborated with Nokia to successfully demonstrate the first public 800GE test, validating the readiness of next-generation optics for service providers and network operators.
With the move to the 800GE pluggable optics on front panel ports, interconnect and link reliability requires a new round of validation cycles to support carrier-class environments. These high-speed interfaces create a unique challenge as new 800GE capable silicon devices, optical transceivers and high bandwidth Ethernet speeds must be accurately tested.
The readiness testing was conducted at Nokia’s private SReXperts customer event in Madrid in June 2022, and included Keysight’s AresONE 800GE Layer 1-3 800GE line rate test platform and the Nokia 7750 Service Routing platform. The AresONE was used to test and qualify Nokia’s FP5 network processor silicon along with 800GE pluggable optics. Specific Nokia platforms used in the validation were the FP5 based 7750 SR-1x-48D supporting 48 ports of 800GE and the 7750 SR-1se supporting 36 ports of 800GE.
Nokia’s FP5 silicon delivers 112G SerDes which enables 800GE support in hardware. FP5 enables networks to efficiently scale capacity and concurrently IP subscriber services while maintaining integrity, providing advanced protection against escalating network security threats, and lowering power consumption. Nokia is the first vendor to ship high-density 800GE systems this year with platforms supporting a range of 36 x 800GE in compact fixed platforms to 432 ports of 800GE in the flagship 7750 SR-14s.
“The move to 800GE presents service providers and vendors in the supply chain with new challenges to validate chips, optical transceivers, or networking equipment port electronics,” said Ram Periakaruppan, vice president and general manager, Keysight's Network Test and Security Solutions group. “The unique combination of the Keysight AresONE 800GE test system and Nokia's 7750 Service Router addresses the interoperability challenges in 112Gbps electrical lane signaling and supports the service provider community to accelerate validation of carrier-class 800GE devices and network infrastructure in a multi-service environment.”
“We are extremely pleased to partner with Keysight and showcase our FP5 silicon in this important, world’s first demonstration,” said Ken Kutzler, vice president of IP Routing Hardware at Nokia. “Nokia’s industry leading, innovative FP5 silicon is the first network processor silicon for high-performance routing to meet the demands of the 800GE network upgrade cycle. The combination of Keysight’s AresONE 800GE with Nokia’s FP5 and 7750 SR platform meets both the performance and verification needs of our 800GE IP routing interfaces.”
Share on:
Suggested Items
Target Condition: From Dream House to Drill Files
06/05/2025 | Kelly Dack -- Column: Target ConditionIf you caught the movie “Barbie,” you may have laughed at its over-the-top utopia where every day begins with perfect weather, perfect smiles, and a perfectly pink commute. But beyond the plastic glam, the film subtly critiques the illusion of perfection—a message that feels surprisingly relevant to the world of PCB design and manufacturing.
Datest Receives Its 16th AS9100D Recertification Audit
06/03/2025 | DatestDatest, a trusted leader in advanced testing, engineering, inspection, and failure analysis services, proudly announces sixteen straight years of aerospace-grade perfection. Cue the confetti cannons (ESD-safe, of course).
The Chemical Connection: Reducing Defects in Circuit Board Production
06/04/2025 | Don Ball -- Column: The Chemical ConnectionWe all agree that in any manufacturing process, reducing defects in your product induced during manufacture (aka increasing yields) is a good thing. Doing so, however, can be a source of contention and frustration. I don’t pretend to be an expert in this field, because most of my work involves feasibility studies for new concepts or testing improvements made to existing equipment. High yields were usually not a factor; it’s simply about having enough data to prove or disprove a concept or seeing whether improvements to equipment design actually work. However, here are some observations I made visiting quality shops where high production at high yields was important.
atg Luther Maelzer Announces Grand Opening of New Office and Manufacturing Facility
06/02/2025 | atg Luther & Maelzer GmbHAtg Luther Maelzer, a leading supplier of electrical testing solutions for the PCB industry, recently celebrated with a grand opening of their new office and manufacturing facility in Wertheim, Germany.
It’s Only Common Sense: Trust Is All You Need
06/02/2025 | Dan Beaulieu -- Column: It's Only Common SenseTrust is all you need, and the best way to build it is by showing that others have placed their faith in you. This is where social proof becomes a game-changer. Social proof is a psychological phenomenon that influences people to follow others’ actions, especially in uncertain situations. By leveraging social proof, businesses can attract customers and close deals more efficiently. Here’s how to incorporate social proof into your strategy and watch your closing rate soar.