Flexible Thinking: Integrated Passive Devices—Design Solutions With Many Benefits
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
Connect the Dots: Five Best Practices for Designing Flex and Rigid-flex PCBsITEQ Reports Lower July Sales
August 31, 2022 | ITEQ CorporationEstimated reading time: Less than a minute
ITEQ Corp., a Taiwan-based manufacturer of high-performance copper clad laminate (CCL) materials used for the fabrication of printed circuit boards (PCBs), has posted sales of NT$2.2 billion ($72.35 million at $1=NT$30.45) for July, down by 13% from the previous month and by 25.4% year-on-year (YoY).
For January to July, ITEQ posted total sales of NT$18.12 billion ($595.18 million), down by 2% compared with the same period last year.
Share on:
Suggested Items
Trouble in Your Tank: Interconnect Defect—The Three Degrees of Separation
10/01/2024 | Michael Carano -- Column: Trouble in Your TankIt has been well documented that, with a very expensive and complex printed circuit board, thermal and mechanical excursions often find weaknesses. A lack of robustness and poor process control often leads to the exploitation of those weaknesses. An interconnect defect (ICD) often goes undetected until the printed circuit board reaches the final assembly stage or undergoes multiple thermal cycles, including interconnect stress tests or thermal shock. It is impossible to rework the ICD defect. But unlike voids, if detected in time, the panels can be reprocessed.
Connect the Dots: Designing for Reality—Outer Layer Imaging
09/26/2024 | Matt Stevenson -- Column: Connect the DotsWelcome to the next step in the manufacturing process—the one that gets the chemical engineer in all of us excited. I am referring to outer layer imaging, or how we convert digital designs to physical products. On a recent episode of I-Connect007’s On the Line with… podcast, we explained how the outer layer imaging process maps the design’s unique features onto the board.
Trouble in Your Tank: Things You Can Do for Better Wet Process Control
09/11/2024 | Michael Carano -- Column: Trouble in Your TankFor 40 years, I have been involved in the printed circuit board, circuit board assembly, and semiconductor technology segments, preaching about minimizing defects and improving yields. This is especially true as technology becomes increasingly complex, and additional focus must be placed on yield improvements. Process management and wet process control must be front and center, so it’s quite interesting and timely to talk about wet process control and management for this month’s issue. This theme fits quite well with today's global events. For this industry, the technical curve has steepened dramatically in the past few years.
Atotech to Participate at KPCA Show 2024
09/03/2024 | AtotechMKS’ Atotech will participate in this year’s KPCA Show 2024 in Incheon, held at Songdo Convensia from September 4-6, 2024.
Victory Announces Breakthrough in PCB Technology with New Product Launch
08/29/2024 | openPRShenzhen Victory Electronics Technology Co., Ltd., a leader in the printed circuit board (PCB) manufacturing industry, is proud to announce the successful development of a groundbreaking new product.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in