Intel, Broadcom Achieve Major Wi-Fi 7 Industry Milestone
September 9, 2022 | IntelEstimated reading time: 2 minutes

Intel Corporation and Broadcom Inc. showcased the industry’s first cross-vendor Wi-Fi 7 demonstration, with over-the-air speeds greater than 5 gigabits per second. The trial used an Intel® Core™ processor-based laptop with a Wi-Fi 7 solution connected to a Broadcom Wi-Fi 7 access point.
“We are proud to highlight how next-generation Wi-Fi 7 can make new mobile PC experiences possible. Industry collaboration is essential to ensure we deliver on the promises of this new wireless technology. We would like to thank our colleagues at Broadcom for their great technical cooperation, which helped enable this unprecedented, first-of-its-kind demonstration of ultra-high speed and ultra-low latency Wi-Fi 7,” said Carlos Cordeiro, Intel Fellow and Wireless CTO, Client Computing Group, Intel.
Vijay Nagarajan, vice president, Wireless Connectivity Division, Broadcom, said, “Today’s milestone sends a clear message: the ecosystem is ready and Wi-Fi 7 is here to deliver extraordinary capacity and blazing fast speeds to extend gigabit broadband. The reliable, low latency communication provided by Wi-Fi 7 is a key element of Broadcom's vision for connecting everything as the Internet evolves to its next iteration replete with immersive experiences. Industry collaboration is key to making this unprecedented connectivity a reality and we were delighted to work with Intel to achieve another industry first.”
Wi-Fi 7 is the platform for the next 10 years of wireless experiences, which require higher speeds, lower latency, improved reliability and greater capacity. Wi-Fi 7 leverages new features including wider 320 MHz channels in unlicensed 6GHz spectrum, higher order 4K QAM data modulation, simultaneous connections across multiple bands with multi-link operation and improved channel utilization efficiency with multi-resource unit puncturing.
Wi-Fi 7’s deterministic operation enables new product classes, including augmented and virtual reality, ultra-high-definition 16K media streaming, and super-responsive and reliable gaming, while supporting large numbers of connected devices in the home or office. And with Wi-Fi 7’s greatly increased speeds, broadband subscribers will get full value from their multi-gigabit internet plans.
“Wi-Fi 7 is the most powerful and capable Wi-Fi protocol yet and will allow Wi-Fi to continue to serve the most demanding applications in the consumer and vertical markets with the highest level of determinism yet,” said Phil Solis, Research Director, Connectivity at IDC. “Interoperability testing between Intel and Broadcom will enable the development of products that can be used in the test beds for official Wi-Fi Alliance certification testing.”
Intel and Broadcom provide the full network that is essential to help maximize Wi-Fi 7’s potential and deliver end-to-end experiences to the wider Wi-Fi marketplace.
“As longtime WBA board members, Broadcom and Intel have been instrumental in pioneering Wi-Fi 6 and 6E. Now they’re leading the way again with Wi-Fi 7, which leverages the rapidly growing availability of 6 GHz spectrum in multiple countries across APAC, EMEA, Latin America and the U.S. Their successful trial is a milestone toward bringing Wi-Fi 7’s double-digit gigabit speeds, ultra-low latency, carrier-grade resilience and other next-generation capabilities to consumers and businesses worldwide.?Enterprise and residential networks will also greatly benefit from the advanced capabilities of Wi-Fi 7,”?said Tiago Rodrigues, CEO of the Wireless Broadband Alliance.
Today’s achievement is proof that Wi-Fi 7 has arrived, and Broadcom and Intel will continue to show the additional capabilities of Wi-Fi 7.
Suggested Items
Rules of Thumb: Design007 Magazine, November 2024
11/11/2024 | I-Connect007 Editorial TeamRules of thumb are everywhere, but there may be hundreds of rules of thumb for PCB design. They’re built on design formulas, fabricators’ limitations, and tribal knowledge. And unfortunately, some longtime rules of thumb should be avoided at all costs. How do we separate the wheat from the chaff, so to speak?
Connect the Dots: Best Practices for Prototyping
09/21/2023 | Matt Stevenson -- Column: Connect the DotsPCB prototyping is a critical juncture during an electronic device’s journey from concept to reality. Regardless of a project’s complexity, the process of transforming a design into a working board is often enlightening in terms of how a design can be improved before a PCB is ready for full production.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Asia/Pacific AI Spending Surge to Reach a Projected $78 Billion by 2027
09/19/2023 | IDCAsia/Pacific spending on Artificial Intelligence (AI) ), including software, services, and hardware for AI-centric systems will grow to $78.4 billion in 2027, according to International Data Corporation's latest Worldwide Artificial Intelligence Spending Guide.
Intel to Sell Minority Stake in IMS Nanofabrication Business to TSMC
09/13/2023 | IntelIntel Corporation announced that it has agreed to sell an approximately 10% stake in the IMS Nanofabrication business to TSMC. TSMC’s investment values IMS at approximately $4.3 billion, consistent with the valuation of the recent stake sale to Bain Capital Special Situations.