Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
Global Citizenship: Together for a Perfect PCB Solution
Smart Automation: Odd-form Assembly—Dedicated Insertion Equipment Matters
iNEMI Workshop: Reliability Challenges and Solutions for Automotive Electronics
September 20, 2022 | iNEMIEstimated reading time: 1 minute
Join iNEMI to discuss reliability requirements and challenges posed by the ever-increasing electronics found in today’s automobiles. This workshop will be hosted by ZESTRON at their North Asia Analytical Center & Technical Center in Shanghai on Thursday, October 20, 2022, 9:00-17:10.
Automotive electronics is expected to be one of the fastest growing segments in the electronics industry. Automobiles are incorporating more electronics from various industry sectors that have not been optimally designed for use in the automotive environment where conditions are significantly more challenging. Challenges include high power, high and low temperature extremes, vibration, shock, exposure to dirt and contaminants, moisture, chemicals, radiation and gasses, plus reliability expectations beyond typical consumer electronics.
This workshop will provide an interactive forum where participants can discuss and share knowledge and experiences on topics such as:
- Material and technology trends for automotive electronics
- Current reliability issues effecting the electronics in EVs, including PCBs, solder joints, components, and subsystems
- Material characterization, failure analysis, reliability modeling, standards, and specifications
- Knowledge gaps and collaboration opportunities to address common issues facing the automotive supply chain to speed material and technology development and to mitigate reliability risks and improve yield and quality
The agenda includes speakers from:
- Binjiang Institute of Zhejiang University
- Continental
- ESI Automotive
- IMI Technology
- SAIC-VOLKSWAGEN
- NXP Semiconductors
- NIO
- ZESTRON
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
Koh Young, Fuji, and Kurtz ERSA Drive Smart Manufacturing Solutions for EV and Automotive Electronics at Kunshan, China Technical Seminar
09/11/2025 | Koh YoungKoh Young Technology, the global leader in True 3D measurement-based inspection solutions, partnered with Fuji Corporation and Kurtz ERSA to host an exclusive technical seminar for leading automotive manufacturers in East China. Held on September 4 at Fuji’s factory in Kunshan, the event gathered participants representing over 35 companies.
MacDermid Alpha Presents at SMTA New Delhi, Bangalore Chapter, on Flux–OSP Interaction
09/09/2025 | MacDermid Alpha Electronics SolutionsMacDermid Alpha contributes technical insights on OSP solderability at the Bangalore Chapter, SMTA reinforcing commitment to knowledge-sharing and industry collaboration.
Electra’s ElectraJet EMJ110 Inkjet Soldermask Now in Black & Blue at Sunrise Electronics
09/08/2025 | Electra Polymers LtdFollowing the successful deployment of Electra’s Green EMJ110 Inkjet Soldermask on KLA’s Orbotech Neos™ platform at Sunrise Electronics in Elk Grove Village, Illinois, production has now moved beyond green.
Absolute EMS: The Science of the Perfect Solder Joint
09/05/2025 | Absolute EMS, Inc.Absolute EMS, Inc., a six-time award-winning provider of fast turnaround, turnkey contract electronic manufacturing services (EMS), is drawing attention to the critical role of 3D Solder Paste Inspection (SPI) in ensuring the reliability of both FLEX and rigid printed circuit board assemblies (PCBAs).