Flexible Thinking: Rules of Thumb: A Word to the Wise
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
Connect the Dots: Five Best Practices for Designing Flex and Rigid-flex PCBs
American Standard Circuits to Exhibit at PCB West 2022
October 3, 2022 | American Standard CircuitsEstimated reading time: Less than a minute
American Standard Circuits will be exhibiting at the 2022 PCB West show on Wednesday, Oct. 5 at the Santa Clara Convention Center.
American Standard Circuits president and CEO Anaya Vardya stated, “Silicon Valley is a target rich area with lots of opportunity to talk with so many PCB designers. As we grow, nearing $50 million this year, we continue our involvement with a great deal of cutting-edge technology which means working closely with designers on their products of the future. PCB West is certainly the best show for this.”
Be sure to visit American Standard Circuits on the show floor in booth #616.
Check out this educational content from American Standard Circuits:
- The Printed Circuit Designer’s Guide to…?Fundamentals of RF/Microwave PCBs
- The Printed Circuit Designer’s Guide to… Flex and Rigid-Flex Fundamentals
- The Printed Circuit Designer’s Guide to… Thermal Management: A Fabricator’s Perspective
- RealTime with… American Standard Circuits, three discussions: flex and rigid flex PCBs by Anaya Vardya and Dave Lackey; RF/microwave PCBS by Anaya Vardya and John Bushie; and thermal management by Anaya Vardya, John Bushie, and Dave Lackey
- You can also view other titles in our full I-007eBooks library.
Share on:
Suggested Items
Designing for Cost to Manufacture
11/21/2024 | Marcy LaRont, I-Connect007ICAPE's Richard Koensgen, a seasoned field application engineer with a rich background in PCB technology, shares his journey of working with customers and manufacturers through the intricacies of circuit board development and emphasizes the importance of early-stage collaboration with PCB designers. With a focus on tackling the most challenging aspects of PCB design and manufacturing, he discusses everything from layout considerations to the thermal challenges of today's technology when it comes to designing for cost.
OSI Systems Receives $11M Order for Electronic Assemblies
11/21/2024 | BUSINESS WIREOSI Systems, Inc announced that its Optoelectronics and Manufacturing division has received an order for approximately $11 million to provide critical electronic sub-assemblies for a leading-edge healthcare original equipment manufacturer (OEM), known for innovative and specialized medical solutions.
CHIPS for America Announces Up to $300M in Funding to Boost U.S. Semiconductor Packaging
11/21/2024 | U.S. Chamber of CommerceThe Biden-Harris Administration announced that the U.S. Department of Commerce (DOC) is entering negotiations to invest up to $300 million in advanced packaging research projects in Georgia, California, and Arizona to accelerate the development of cutting-edge technologies essential to the semiconductor industry.
NTT, Olympus Joint Demonstration Shows IOWN APN's Low-latency Capability
11/21/2024 | JCN NewswireNTT Corporation and Olympus Corporation announced that, following the start of their joint experiment in March of the world’s first cloud endoscope system which processes endoscopic videos on the cloud, they jointly established a cloud endoscopy system utilizing the IOWN APN technology.
Hon Hai Joins OpenUSD Alliance to Promote Standardized and Open Source Universal Scenario Description (USD) Technology
11/21/2024 | Hon Hai Technology GroupHon Hai Technology Group , the world’s largest technology manufacturing and service provider, announced that it has joined the Alliance for OpenUSD (AOUSD ) to support the construction of a 3D ecosystem and promote Cooperation among various industries around the world promotes the standardization of Universal Scene Description (USD ).
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in