It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Millennium Circuits on The Move
October 31, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 5 minutes
I recently met with Daniel Thau, CEO of Millennium Circuits Limited, at PCB West. This Pennsylvania-based PCB distributor has been on an expansion path lately, so I asked Daniel to introduce us to MCL and explain where the company is headed. As Daniel says, it’s all about impacting the world in a positive way.
Andy Shaughnessy: It’s nice to meet you. How are things going, Daniel?
Daniel Thau: Things are going well. Great to meet you too.
Shaughnessy: Well, why don’t you start by telling us a little about Millennium Circuits Limited? How long have you all been in business?
Thau: MCL was launched in January 2005. Our core business is the distribution of printed circuit boards. Our customers are typically building complex boards. MCL has the technical expertise to increase their speed to market by 19.8%.
Shaughnessy: Tell us about how you founded the company and give us the back story. What’s your background?
Thau: I grew up in Central Pennsylvania and I went to a community college there called HACC, Harrisburg Area Community College. I specialized in engineering and I got my associate’s degree. At that time, I started the company, and I never went any further with my degree. The company took me in that direction instead of the school direction. We started in January 2005, and now we have about 400 customers across North America and about $20 million in revenue.
Shaughnessy: So, you launched MCL 17 years ago; you don’t look old enough to have spent 17 years in PCBs.
Thau: I started the company when I was 21.
Shaughnessy: What made you decide to be an entrepreneur?
Thau: Well, I had a partner back then. They were doing circuit board assemblies and they were getting manufactured in India and we basically started selling bare printed circuit boards. I really liked it, because it was a fast-paced environment and that fits my personality well. About three years into it, I bought him out and that’s when business took off. We built our building about seven years ago. It’s about 10,000 square feet and it’s about 6,000 square feet of office and the rest is inspection and warehouse and things like that.
Shaughnessy: So, you’re not doing actual fabrication?
Thau: We do not have in-house manufacturing. We have strategic partners overseas in domestic, and we take a right-fit approach. That means we look for niche manufacturers for each customer’s product. So, if the customer’s looking for a complex printed circuit board, and they need it quickly, we have a niche manufacturing partner for them that MCL can utilize. And, if they’re looking for a high volume, or ITAR jobs, or things like that, we have niche manufacturers for that need. Our customer will only deal with MCL here domestically. They’ll never deal with anybody overseas. We have the technical expertise for the customer, and we can answer any questions they have efficiently.
Shaughnessy: So, the customer won’t have to deal with anybody but you.
Thau: Yes, and we also have boots on the ground overseas.
Shaughnessy: So, you’ve qualified your overseas partners.
Thau: Yes. From a relationship standpoint, in my experience, if you don’t have boots on the ground over there, it’s very challenging to get answers quickly and get our customers what they need to support them in the right way.
Shaughnessy: How would you describe your sweet spot?
Thau: Great question. For customers who have a complex printed circuit board, MCL has the technical expertise to increase your speed to market by 19.8%. So, it’s really on the complex side where we shine. When customers have challenges with their boards, they come to us. Once we had a customer that had a high-impedance short on their printed circuit board and they weren’t sure exactly how to fix the problem. They came to us, and we were able to build the boards in about seven days and get them to them. It was a class three product, so it’s very high visibility. Through solving their problem and turning the boards around quickly, we became the sole source on that product now for them.
Shaughnessy: To move that quickly you must have a tight process at MCL, can you share that?
Thau: Sure, I can walk you through it. We call it our rapid launch process, and everything is geared to increase the speed to market for the customer. When the quote comes in, we do a DFM, which pulls out things like trace and space, smallest hole layer count, distribution of layers, impedance concerns, and things like that.
We can catch all of that on the front end. After that, we send the quote to the customer. If they like it, they’ll place the order with MCL. Then we’ll go through a more in-depth, 56-point DFM check, and then we’ll check things like copper slivers and we may have to clean up other items more in depth. We can be proactive and head off challenges that the customer may experience after the PCB s are made, from quoting to manufacturing to logistics. Everything we do is geared toward increasing the customer’s speed to market.
Shaughnessy: Do you test the boards, or do your partners do this?
Thau: Yes, from an electrical test standpoint, that’s done at the manufacturer. But like I said, we do have people there to verify that it’s being done, and all of our product comes with first-article inspection reports. If it’s Class 3, we’ll have all the proper documentation and things like that inside the package for the customer. All our PCBs will be electrically tested for opens and shorts and the proof of that will be with the documentation sent to the customer in the first-article inspection report.
Shaughnessy: That’s great. How many employees are in your company?
Thau: We have about 20 employees. We’ve developed an “All In” culture. It’s like having two feet in the boat and having everyone aligned on the same goal. We adopted the entrepreneurial operating system (EOS) as an accountability system, and we really put a big, big emphasis on our culture and our team environment. We’re all in for the customer, and all in for our internal and external suppliers.
Shaughnessy: Your internal customers.
Thau: Exactly. We’re a tight-knit group. Our purpose is advancing innovation to positively impact society. We work with groups that are doing nuclear fusion technology and things like that, that lends directly towards that objective. We hold a monthly meeting with the new customers and showcase the team and show them how we’re moving toward positively impacting society.
Shaughnessy: That’s what it’s all about. Thanks for talking with me today, Daniel.
Thau: My pleasure, Andy.
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.