-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueVoices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
It's Show Time!
In this month’s issue of PCB007 Magazine we reimagine the possibilities featuring stories all about IPC APEX EXPO 2025—covering what to look forward to, and what you don’t want to miss.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
December 2, 2022 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes

Normally, the holiday season is a slow(ish) news time, but this year just feels different. My opinion is that the technology industry banked up a whole bunch of innovations and new products during the pandemic disruptions, which are coming to market as quickly as possible. The November/December news is full of technology discussion, as my selections this week clearly demonstrate.
We have a discussion on additively manufactured electronics, as well as a high-level look at fabrication for the UHDI market—both emerging markets. I also noticed that our readers were quite interested in industry reports on U.S. semiconductor industry challenges, and a forward look at the drivers in the flexible PCB fabrication market, so I was sure to include the links again. Finally, I thought I’d share the news item about a new missile guidance system prototype test that caught reader attention and which has garnered quite a bit of attention.
3D Electronic Devices With Additive Manufacturing
Published November 29
In the news on Dec. 1, Nano Dimension issued a press release announcing Q3 2022 results where the company shares that it is on track to increase revenue by 10X over 2020’s results. That news shines a spotlight on this article from Shavi Spinzi discussing the possibilities of additively manufactured electronics.
Global Flexible PCB Market Report 2022: Rising Use in the Aerospace and Aviation Sector Boosts Growth
Published November 25
My recent conversations with flex manufacturers all have a familiar tone: “We’re really busy, capacity is maxed out.” Well, this quote from the Flexible PCB Marketplace Report news release corroborates what I’m hearing: “The [flex] market is expected to surge in the coming years due to the rising use of flexible printed circuit boards in consumer electronics, especially smartphones, laptops, displays, and other electronic devices. According to official industrial sources, around 1.5 billion smartphones were sold in the year 2019.” The article discusses automotive, aviation and aerospace.
Understanding the UHDI Market
Published November 28
This interview with Meredith LaBeau and Todd Brassard from Calumet Electronics included this in the setup to the conversation, “The more we investigate UHDI in the current market, the more advanced packaging becomes a part of the conversation. The two emerging technologies lean on each other for their overall success. UHDI is the method by which state-of-the-art advanced packaging will be fabricated; substrates are creating a market for UHDI capabilities.” In many ways, Calumet is blazing the trail for nimble PCB fabricators to move forward into capabilities that support advanced packaging. Clearly, readers were interested this week in what LaBeau and Brassard had to say.
New Report Identifies Challenges to Continued U.S. Leadership in Semiconductor Design, Innovation
Published November 30
This report from the Semiconductor Industry Association (with Boston Consulting Group) identifies three key areas the U.S. must address in the administration of the CHIPS Act in order to maintain a leadership position: Design and R&D investment needs are on the rise, there is a shortage of domestic design talent, and open access to global markets is under pressure. Take a read and see if you agree.
PAC-3 Intercepts Target In Successful Test of Lockheed Martin Remote Interceptor Guidance
Published November 25
Lockheed Martin announced that their new missile communication device connected with a U.S. Army PAC-3 missile in flight. This prototype system is seen as a step forward in missile guidance systems.
Suggested Items
Federal Electronics Continues Tradition of Giving Back Through McAuley Ministries’ Lunch on Us Program
04/21/2025 | Federal ElectronicsFederal Electronics, a leader in providing advanced electronic manufacturing services, is proud to give back to the local community through its ongoing support of McAuley Ministries.
Wiring the World Together: IPC and WHMA Unveil Global Wire Harness Competitions and Championship
04/21/2025 | IPCIPC, in collaboration with the Wiring Harness Manufacturer's Association (WHMA), has organized the first-ever World Wire Harness Competitions and Championship.
Real Time with... IPC APEX EXPO 2025: Show Wrap Up–A Review with John Mitchell
04/21/2025 | Real Time with...IPC APEX EXPOMarcy LaRont sits down with Dr. John W. Mitchell on the last day of IPC APEX EXPO 2025, marking its 25th anniversary. They highlight the event's success and specifically recognize this year's technical conference and professional development tracks. They also discuss AI's role in electronics, as Mitchell urges professionals to improve their skills around AI to keep themselves valuable and relevant. AI is here to stay! He touches upon tariffs and promotes a diverse supply chain, emphasizing the essential ingredient of collaboration for mutual success. Ending on sustainability, he discusses IPC's launch of the Evolve program showcasing the industry's commitment to sustainability.
DuPont Announces Additional Directors for the Planned Independent Electronics Company
04/18/2025 | DuPontDuPont announced that Karin De Bondt and Anne Noonan will become members of the future board of directors for the independent Electronics public company that will be created following its intended spin-off from DuPont, which is targeted for November 1, 2025.
Navigating Robotics Deployment Challenges with SINBON
04/18/2025 | PRNewswireIn spite of the potential for robotics technology to expand productivity, several implementation challenges continue to stand in the way of more widespread adoption.