Beyond Design: AI-driven Inverse Stackup Optimization
Global PCB Connections: Following DFM Rules Leads to Better Boards
Elementary Mr. Watson: How to Reinvent Your Professional Journey
Multicircuits Installs New Fully Automated Orbotech 600 LDI
December 7, 2022 | MulticircuitsEstimated reading time: Less than a minute
Michael Thiel, VP of Operations at Multicircuits, announced the installation of a new Orbotech 600 LDI with Technosystem automation.
The Orbotech Nuvogo 600 LDI will be used for the company’s solder mask applications. As part of Multicircuits’ automation initiative, the Technosystem automation was designed and built with a barcoded two-robot system.
When making the announcement, Thiel said, “Installing this system is a key part of our commitment to automation and integrated manufacturing system. We are committed to making Multicircuits as streamlined and efficient using automation wherever possible. We believe this is the future of our company and the industry as well.”
Multicircuits is dedicated to responding to your critical needs, delivering high quality, highly reliable, competitively priced products, when you need them, where you need them. Learn more at www.multicircuits.com.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.