Learning With Leo: UHDI—The Next Leap in PCB Manufacturing
Nolan’s Notes: Is Mexico the Pulse of Electronics in the Americas?
Standard of Excellence: Speed vs. Quality in Customer Service
Book Excerpt: 'The Electronics Industry’s Guide to… The Evolving PCB NPI', Chapter 3
January 4, 2023 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
Chapter 3: Streamlining Data Preparation
With the need to move design data efficiently into manufacturing for assembly and test purposes, starting from a single source of intelligent data seems to be obvious. However, with different applications with different capabilities this can be difficult to achieve. Real-world support for any format can vary between machine and software vendors. The optimal goal should be to create a single digital twin of the product upfront regardless of the downstream applications that need that data.
If we consider the PCB and the parts being placed on it, their data should have significant commonality across the many steps in PCB assembly and test. Typically, we find that process and test engineers think there is much more machine-specific data across their lines than there really is in practice.
Solutions exist in the market that can manage this common data and then deliver machine-specific information to the machine software as needed, on demand. In this way, the factory can maintain the common data, but, more importantly, they have a common part library data that is independent of the line. Remember when we talked about the move from mixed vendor lines to single vendor lines and mixed-line factories? The ability to manage part data in this context is key to efficiently streamlining the NPI phase.
First, let’s start with the typical data preparation tasks that form the base for a typical NPI flow. Being able to accurately import the source layout CAD data is an important first step. As we discussed in chapter one, ODB++ and IPC 2581 provide a common, standardized data format for layout information. However, not all CAD data is the same, even in the context of one format such as ODB++. This is because different designers use unique conventions in their source libraries. The position and rotation of each component placement can be inconsistent for any single format because each component location is based on the definition of the library cell that it references. Why does this decrease efficiency?
Consider that, during the SMT process, the machine picks a component up from a feeder and positions that component, rotating it before releasing it on the board. What the machine considers for the rotation is based on its perspective and the orientation of the part in the feeder. However, what the design software considers for position and orientation is based on an arbitrarily defined cell library. The variations in that cell library are a result of the environment that the designer works in. What is the origin of the cell? Is it pin 1? Is it the middle of the part? Is it a corner on the cell? What is the rotation of the part at 0 degrees? Is it pin 1 to the left or to the right? What about IC components with many pins? Is pin 1 in the lower right corner, or maybe the lower left?
See Figure 3.1 for how a designer may have defined their source footprint, which is what is used for placement position and angle. We have a polarized part here but pin 2 is associated with the silkscreen indicator.
To continue reading this chapter of The Electronics Industry's Guide to... The Evolving PCB NPI Process, download your free book today!
Share on:
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
Target Condition: Distribution of Power—Denounce the Ounce
11/05/2025 | Kelly Dack -- Column: Target ConditionHave you ever wondered why the PCB design segment uses ounces to describe copper thickness? There’s a story behind all of this—a story that’s old, dusty, and more than a little absurd. (Note that I didn’t add “Like many of us.”) Legend has it that back in the days of copper tinkers and roofing tradesmen, the standard was set when a craftsman hammered out a sheet of copper until it weighed one ounce, when its area conveniently matched the square of the king’s foot.
Life Is a Highway: A Family of 8 Turned the Entire U.S. Into a Learning and Working Environment
11/04/2025 | Steven Bowles, Lockheed MartinIt’s 6:45 a.m. in a modern A-frame cabin tucked into the misty edges of the Cascade Range in Arlington, Washington. I’ve just made a quick Nespresso, checked my calendar of virtual meetings, and verified the Airbnb’s Wi-Fi speed is holding steady. In the next room, my wife Lynsey corrals our six kids into breakfast while planning a day trip to Seattle’s Children’s Museum. By 7:30, I’m camera-ready in a makeshift office nook, leading a discussion on HDI PCB design for an IPC standards committee. After a busy day, our Bowles crew, ranging in age from 1 to 10 years old, is hands-on with activities and exhibits in the museum.
TTM Technologies Receives Two Awards from the Global Electronics Association at the 2025 IPC CEMAC Conference
11/03/2025 | Globe NewswireTTM Technologies, Inc. announced that two of its team members received prestigious Asia Steering Committee Outstanding Service Awards from the Global Electronics Association (formerly named IPC connecting global electronics industry) at the 2025 IPC CEMAC Electronics Manufacturing Annual Conference in Shanghai.
TTCI Brings Hands-On Test Engineering and IPC Training Expertise to PCB Carolina 2025
10/31/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a trusted provider of electronic test and manufacturing solutions, and The Training Connection LLC (TTC-LLC) will exhibit at PCB Carolina on Wednesday, November 12, 2025, at the McKimmon Center at NC State University in Raleigh, North Carolina. Attendees can visit Table 4 to say hello to Bert Horner and Bill Graver, and learn more about their test engineering services and technical training programs.
The Training Connection Continues to Grow with Addition of Veteran IPC Trainer Bill Graver
10/30/2025 | The Training Connection LLCThe Training Connection, LLC (TTC-LLC), a premier provider of test engineering and development training, is proud to announce the addition of Bill Graver to its growing team of industry experts. A respected professional with more than 35 years in electronics manufacturing, Bill joins as an IPC Master Trainer, bringing a wealth of hands-on experience in PCB testing, failure analysis, and process improvement.