The Government Circuit: Three Inescapable Conclusions About Global Trade Policies
Global Citizenship: The Global Push for Digital Inclusion
Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
Indium to Participate at 3D-PEIM, Feature Innovative Products for Power Electronics
January 25, 2023 | Indium CorporationEstimated reading time: 2 minutes
Indium Corporation will feature selections from its portfolio of proven products for power electronics applications at the International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM), February 1?3 in Miami, Florida. In addition, Indium Corporation’s Principal Engineer and Manager for the Thermal Interface Materials Applications, Dr. Andy Mackie, will chair a technical session on interconnects and lead attachments on February 2.
Amongst the company’s award-winning portfolio of proven products for power electronics, Indium Corporation will feature:
- InFORMS® are reinforced solder alloy fabrications that improve mechanical and thermal reliability and are specifically designed to produce consistent bondline thickness for power module applications. They also address specific challenges for the power electronics industry by providing an enhanced material for the development of more reliable and higher performance modules.
- InTACK™ is a no-clean, no residue, halogen-free adhesive solution developed for holding parts in place during placement and reflow processes. Designed for use in no-flux reflow applications with formic acid, InTACK™ is specially formulated with high tack to hold a die, chip, or solder preform in place without movement, creating a low-cost tooling-free solution without compromising soldering quality.
- QuickSinter® is a high metal content paste, redefining sinter technology for power electronics. Available in pressureless and pressure formulations, this portfolio of sintering solutions delivers products engineered for customers’ specific application needs.
- Durafuse™ HT features a novel design based on a novel alloy technology, designed to deliver a tin-rich, high-temperature lead-free (HTLF) paste, presenting the merits of both constituent alloys. Durafuse™ HT delivers simplified processing, with no special equipment needed, and enhanced thermal cycling reliability equal to or higher than a high-Pb solder.
Dr. Mackie is an electronics industry expert with a technical background in physical chemistry, surface chemistry, rheology, and semiconductor fabrication and assembly materials and processes. His professional experience covers all aspects of electronics manufacturing from wafer fabrication to semiconductor packaging and SMT/electronics assembly. In his current role, he is focused on identifying thermal material needs and trends for various high-performance applications, as well as the development and testing of innovative solutions to meet the emerging thermal interface material requirements. Dr. Mackie has been an invited international keynote speaker and has lectured internationally on subjects ranging from sub-ppb metals analysis in supercritical carbon dioxide to solder paste rheology. He holds patents in novel polymers, heterogeneous catalysis, and solder paste formulation. Dr. Mackie holds a Ph.D. in physical chemistry from the University of Nottingham, UK, and a Master’s of Science (MSc) in colloid and interface science from the University of Bristol, UK.
Share on:
Suggested Items
Silicon Mountain Contract Services Enhances SMT Capabilities with New HELLER Reflow Oven
07/17/2025 | Silicon Mountain Contract ServicesSilicon Mountain Contract Services, a leading provider of custom electronics manufacturing solutions, is proud to announce a significant upgrade to its SMT production capability with the addition of a HELLER 2043 MK5 10‑zone reflow oven to its Nampa facility.
Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
07/16/2025 | Nash Bell -- Column: Knocking Down the Bone PileIn 1983, the Department of Defense identified that over 40% of military electronic system failures in the field were electrical, with approximately 50% attributed to poor solder connections. Investigations revealed that plated finishes, typically nickel or tin, were porous and non-intermetallic.
SHENMAO Strengthens Semiconductor Capabilities with Acquisition of PMTC
07/10/2025 | SHENMAOSHENMAO America, Inc. has announced the acquisition of Profound Material Technology Co., Ltd. (PMTC), a premier Taiwan-based manufacturer of high-performance solder balls for semiconductor packaging.
KYZEN to Highlight Understencil and PCB Cleaners at SMTA Querétaro Expo and Tech Forum
07/09/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Querétaro Expo & Tech Forum, scheduled to take place Thursday, July 24, at Centro de Congresos y Teatro Metropolitano de Querétaro.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.