Flexible Thinking: The Key to a Successful Flex Circuit Design Transfer
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
American Standard Circuits Installs CIMS Galaxy for AOI
February 22, 2023 | American Standard CircuitsEstimated reading time: 2 minutes
PCB fabricator American Standard Circuits has recently purchased and installed the CIMS Galaxy 30µ automated optical inspection machine as part of their ongoing facility update.
The CIMS Galaxy VIA series represents the family of models designed to support inspection of through laser via in high volume manufacturing of advanced HDI or IC Substrates with the Galaxy VIA 30µ being capable for inspection of via holes down to 30 µm in diameter.
“With our need for speed and accuracy, especially as our boards get denser, we decide that this was the very best test equipment for us at this time,” commented president and CEO Anaya Vardya. “The increased throughput capacity was one of the deciding factors when making our decision.”
The system’s illumination is powered by unique ViaLight™ technology providing a transmissive light source built within the scanning table. The optional Microlight™ illumination provides simultaneous light coverage from the top ensuring the most accurate and complete acquisition of external and internal shape of a through via hole.
The systems within Galaxy VIA series can inspect through laser via drills as small as 20 microns in diameter, detect undersize and oversize defects, contamination, and debris inside, plugged or missing holes as well as drill shifts beyond allowable tolerance.
Powerful statistical packages further extend capabilities of Galaxy VIA series providing real time process control used for laser drill tool calibration.
American Standard Circuits (ASC) prides itself on being a total solutions provider, manufacturing quality rigid, metal-backed, RF/microwave, flex, and rigid-flex PCBs for the medical, automotive, industrial, defense, and aerospace markets in volumes from test and prototypes to large production orders. ASC has the expertise to provide a wide variety of technologies in a time-critical environment. ASC is also a licensee of the Averatek A-SAP™ technology which gives them the capability of manufacturing sub 25 micron lines / spaces. Their qualifications include AS9100 Rev D, ISO 9001:2015, IATF16949:2016 MIL-PRF 31032, MIL-PRF-55110, MIL-PRF-50884 certification and ITAR registration. In addition to manufacturing in the USA, ASC can transition and manage PCB requirements to lower cost regions via its qualified supply chain of offshore partners. ASC also holds many key patents for metal bonding processes. For more information about American Standard Circuits' services or to ask one of their technology experts a question go to www.asc-i.com.
Check out this educational content from American Standard Circuits:
- The Printed Circuit Designer’s Guide to…?Fundamentals of RF/Microwave PCBs
- The Printed Circuit Designer’s Guide to… Flex and Rigid-Flex Fundamentals
- The Printed Circuit Designer’s Guide to… Thermal Management: A Fabricator’s Perspective
- RealTime with… American Standard Circuits, three discussions: flex and rigid flex PCBs by Anaya Vardya and Dave Lackey; RF/microwave PCBS by Anaya Vardya and John Bushie; and thermal management by Anaya Vardya, John Bushie, and Dave Lackey
You can also view other titles in our full I-007eBooks library.
Share on:
Suggested Items
Investment in High-Tech Manufacturing: Zollner Opens Cleanroom in Hungary
03/28/2025 | Zollner Elektronik AGIn a ceremonial event on March 13, 2025, representatives from ASML and Zollner inaugurated the new cleanroom at the Hungarian site in Vác. Among those present were Wayne Allan, Chief Strategic Sourcing & Procurement Officer, and Member of the Board of Management at ASML, Michiel Claessens.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/28/2025 | Andy Shaughnessy, I-Connect007I’ve spent my week recovering from a busy and interesting week in Anaheim for the 25th IPC APEX EXPO. I think back to my first APEX EXPO, and the changes since then are too numerous to count. I first attended in 2004, also in Anaheim, back when there was almost no design content in the conference or expo portions of the show. It was just a few years after the downturn, and attendees and exhibitors alike were skittish, almost afraid to show confidence in our industry. A few unemployed design friends handed out copies of their resumes. Travel budgets were still down, and the aisles weren’t exactly packed with traffic.
Real Time with... IPC APEX EXPO 2025: MKS' Atotech—Leading Innovations in Semiconductor Solutions
03/28/2025 | Real Time with...IPC APEX EXPOIn this interview, Marcy LaRont speaks with Kuldip Johal, CTO, MKS’ Atotech. Based in Boston, MKS operates in vacuum solutions, photonics, and specifically for the Atotech division, material solutions. MKS significantly impacts the semiconductor industry, supplying components for up to 85% of global semiconductor tools and covers processes and materials for 70% of PCB manufacturing steps.
EIPC Summer Conference 2025: Call for Distinguished Speakers in Edinburgh
03/26/2025 | EIPCThe European Institute of Printed Circuits (EIPC) is pleased to announce its Summer Conference 2025, scheduled for June 3-4 in the historic city of Edinburgh, Scotland.
Global PCB Connections: A Field Engineer’s Perspective on the Top 10 Trends to Watch
03/27/2025 | Jerome Larez -- Column: Global PCB ConnectionsAs a field application engineer for a major Chinese PCB company, I see firsthand the challenges and, more excitingly, the trends shaping our industry. Talking to engineers, designers, and procurement teams worldwide, one thing is clear: PCBs have come a long way, but we’re barely scratching the surface of what’s possible. Here are 10 trends I believe will define our industry over the next decade.