-
-
News
News Highlights
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Alpha Takes the Greenfield Route
February 28, 2023 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes

Alpha Circuit is a PCB fabricator located in Elmhurst, Illinois. Given that the launch of a new PCB fab is a rare occasion these days, we caught up with the senior team—Prashant Patel, president and CEO; Steve Smith, general manager; Steve Ryan, sales and direct support—guiding the buildout of Alpha Circuit’s brand new 44,000 square foot facility. They discuss what goes into equipment selection and line design, and the timing couldn’t have been better. At press time, the new facility was on schedule for test production by the end of January 2023.
Throughout the conversation, the Alpha team shared its methods for designing the facility, the parts of the fabrication process that are critical to get exactly right, and where the surprises were in the process.
Nolan Johnson: Gentlemen, welcome, and congratulations on your new facility. Let’s start with a little background about the company.
Steve Ryan: Alpha Circuit started in 1981, as a single- and double-sided board shop. Zenith was one of our big customers early on. We did a lot of punching and crunching back then and it is what really catapulted the revenue stream for us. When I joined the company in 2009, we were comfortably an eight to 12-layer multilayer and double-sided manufacturer. In 2013, we started doing flex and rigid-flex, increased our multilayers up to 28 layers, and started manufacturing copper-based pedestal-type design work.
Prashant Patel: When I acquired the company in 2020, my vision was to continue Alpha Circuit the way it was, while building a new facility to meet the higher technology demands. We purchased and renovated a 44,000 square foot facility, then ordered the equipment. It takes a long time to source equipment—you get the quotes, have it installed, and then get it running up to speed. That process has taken us over three years.
Steve Smith: I joined the company approximately two months ago. My background is HDI: stacked microvias, staggered microvias, along with high-speed digital materials, low-loss materials. I was hired to put the technology part of it together, getting the proper people and processes in place, so we can handle microelectronics down to 25-micron line and space and down to 3-mil pads.
Johnson: Great, thank you for that. Now, I want to talk today about your recent equipment purchases.
Smith: We have purchased a laser drill, and we have brand-new 200,000 RPM drill machines in place to do high aspect ratio holes. We also have a brand-new plating line with state-of-the-art chemistries to be able to do copper fill and through-hole plating in the same process along with being able to manufacture stacked vias starting with a 2-mil core substrate and stacking up to seven or eight lamination cycles.
To read this entire conversation, which appeared in the February 2023 issue of SMT007 Magazine, click here.
Suggested Items
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.