The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Best Papers from SMTA International Announced
March 10, 2023 | SMTAEstimated reading time: 2 minutes
The SMTA is pleased to announce the Best Papers from SMTA International 2022. The winners were selected by members of the conference technical committee. For these exceptional achievements, a plaque is given to primary authors of all winning papers.
The following four papers were selected for the “Best of Proceedings” award:
Andrew Mawer, NXP Semiconductors, for the paper “Assembly and Reliability of a Novel High Density Dual Row MaxQFP." Co-authors include Mollie Benson, X.S. Pang, Stephen Lee, J.Z. Yao, Alvin Youngblood, NXP Semiconductors.
Keith Sweatman, Nihon Superior Co., Ltd., for the paper “Effect of Strain Rate on the Ductility of Bismuth-Containing Solders." Co-authors include Tetsuro Nishimura, Nihon Superior Co., Ltd.; Stuart McDonald, Xiaozhou Ye, Qichao Hao, Beatrice Negura, Xin Fu Tan, Kazuhiro Nogita, The University of Queensland.
Richard Coyle, Ph.D., Nokia Bell Labs, for the paper “Thermal Fatigue of QFN and Chip Resistor Solder Joints Assembled with SnPb, SAC305, and SnBi Solders." Co-authors include Faramarz Hadian, Eric Cotts, Binghamton University; Xinzhi Feng, Martin Anselm, Ph.D., Rochester Institute of Technology; Richard Popowich, Nokia; Lenora Clark, ESI Automotive.
Tim Pearson, Collins Aerospace, for the paper “Thermal Fatigue Reliability of a 1206 Chip Resistor with High-Performance Pb-Free Solder Alloys." The work was a joint effort by a large group of co-authors as part of the iNEMI Alternative Alloys Program and the High Density Package (HDP) User Group.
The following five papers received honorable mention:
Aileen Allen, HP Inc., for the paper “A Review of the Impact of Dopants in Sn-Bi Solder Alloys." Co-authors include Helen Holder, Elizabeth Benedetto, HP Inc.
Jean-Paul Clech, EPSI Inc., for the paper “Predicting the Saturation of Solder Joint Cycles to Failure with Thermal Cycling Dwell Times."
Richard Coyle, Ph.D., Nokia Bell Labs, for the paper “Improved Thermal Fatigue Reliability of SAC305 due to Mixed Metallurgy Assembly with a High-Performance Bi-Bearing Solder Paste." The work was a joint effort by a large group of co-authors as part of an HDP (High Density Package) User Group Project.
Tae-Kyu Lee, Ph.D., Cisco Systems, for the paper “Low Melting Temperature Solder Interconnect Thermal Cycling Performance Enhancement using Elemental Tuning." Co-authors include Kendra Young, Portland State University; Nilesh Badwe, Raiyo Aspandiar, Satyajit Walwadkar, Intel Corporation; Young-Woo Lee, Hui-Joong Kim, Junk-Tak Moon, MK Electron Co., Ltd.
Kevin Byrd, Intel Corporation, for the paper “Functional System Observations of Tin-Bismuth Low Temperature Solder Electromigration Behavior." Co-authors include Brian Franco, Intel Corporation.
The authors will receive their awards during a ceremony at SMTA International 2023. The SMTA International Conference and Exhibition (SMTAI) 2023 will be held October 9-12, 2023 at the Minneapolis Convention Center in Minneapolis, MN, USA. Details on participating in the 2023 SMTA International Conference are posted on the event website.
Abstracts of all papers can be browsed directly in the online Knowledge Base. Featuring thousands of full-length technical articles, the SMTA Knowledge Base is searchable to all visitors, but free PDF downloads are available only to SMTA members. Non-members can easily join SMTA for real-time access to the Knowledge Base.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.