-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueTechnology Roadmaps
In this issue of PCB007 Magazine, we discuss technology roadmaps and what they mean for our businesses, providing context to the all-important question: What is my company’s technology roadmap?
Wet Process Control
In this issue, we examine wet processes and how to obtain a better degree of control that allows usable data to guide our decisions and produce consistently higher-quality products.
Don’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Bending 2D Nanomaterial Could 'Switch On’ Future Technologies
March 15, 2023 | Rice UniversityEstimated reading time: 2 minutes
Rice University materials scientist Boris Yakobson and collaborators uncovered a property of ferroelectric 2D materials that could be exploited as a feature in future devices.
Because they bend in response to an electrical stimulus, single-layer ferroelectric materials can be controlled to act as a nanoscale switch or even a motor, according to the study published in ACS Nano.
Single-layer or 2D materials are typically made up of a single layer of atoms, meaning they are only a few nanometers thick. They have received significant attention in recent years due to their physical, electrical, chemical and optical properties, which makes them useful in applications ranging from consumer electronics to medical and industrial technologies.
“2D materials are very thin and very flexible,” Yakobson said. “In single-layer ferroelectrics, this produces an unexpected spontaneous, active bending behavior.”
“The novelty we found in this study is that there is a connection or coupling between the ferroelectric state and the bending or flexing of the material. This work combines the discovery or prediction of a fundamental property of a class of 2D materials with a practical application angle.”
Ferroelectrics are materials made up of negative and positive ions that can shift to produce spontaneous polarization, meaning the ions segregate based on their electrical charge.
“The interesting thing is that the atoms are not identical,” explains Jun-Jie Zhang, a Rice postdoctoral research associate and lead author on the study. “Some of them are larger, and some are smaller, so the layer symmetry is broken.”
Polarization drives the larger atoms to one side of the 2D-material layer and the smaller atoms to the other side. This asymmetrical distribution of the atoms or ions causes the material surface to bend in ferroelectric state.
“So instead of remaining flat, in ferroelectric state the material will bend,” Yakobson said. “If you switch the polarization – and you can switch it by applying electrical voltage – you can control the direction in which it will bend. This controllable behavior means you have an actuator.
“An actuator is any device that translates a signal – in many cases an electrical signal, but it can be a different kind of signal – into mechanical displacement or, in other words, movement or work.”
The study looked at 2D indium phosphide (InP) as a representative of the class of ferroelectrics for which it predicts this property.
“This new property or flexing behavior has to be tested in a laboratory for specific substances,” Yakobson said. “Its most likely use will be as a type of switch. This behavior is very fast, very sensitive, which means that with a very tiny local signal you can maybe switch on a turbine or electrical engine, or control adaptive-optics telescopes’ mirrors. That’s basically the essence of these actuators.
“When you drive your car, you have a lot of knobs and switches and it makes everything really easy. You don’t have to crank open your car window anymore, you can just turn on a switch.”
Yakobson is Rice’s Karl F. Hasselmann Professor of Materials Science and NanoEngineering. Taif University chemist Tariq Altalhi is a co-author on the study.
Suggested Items
Fresh PCB Concepts: The Journey of a PCB—A Tale of Sustainability and Circularity
09/12/2024 | Team NCAB -- Column: Fresh PCB ConceptsImagine a bustling factory floor where hundreds of PCBs hum with potential, each one destined to be the brain of a new electronic device. From the sleek smartphone in your pocket to the intricate systems in electric vehicles, PCBs are the unsung heroes of our digital world. But have you ever wondered what happens to these tiny powerhouses when their work is done? The journey of a PCB doesn’t end when a device reaches the end of its life. In fact, that’s where the next chapter begins—a chapter that’s critical for our environment and our future.
Creative Materials, Unveils Economical Conductive Ink and High Dielectric Strength Ink for Advanced Electronic Applications
09/11/2024 | Creative Materials, Inc.Creative Materials Inc., an innovator of materials for the electronics industry, is pleased to announce the launch of two new high performance ink products:
Smartkem, Chip Foundation Partner on MicroLED Backlight Tech
09/10/2024 | PRNewswireSmartkem, a company that has the potential to power the next generation of displays using its disruptive organic thin-film transistors (OTFTs), announced that it has entered into a joint development agreement with Shanghai Chip Foundation Semiconductor Technology Co., Ltd., a manufacturer of semiconductor and integrated circuit devices, to co-develop a new generation of microLED-based backlight technology for Liquid Crystal Displays.
A Parametric Approach to the Environmental Impact of PCB Fabrication
09/09/2024 | Maarten Cauwe, imecSustainability for electronics is receiving more attention due to environmental concerns, regulatory obligations, and to ensure competitiveness in a growing market for sustainable products. To facilitate the discussion on the environmental impact of electronics, there is a strong need for data on energy use, carbon footprint, greenhouse gas (GHG) emissions, hazardous chemicals used during manufacturing, waste generation, etc.
iNEMI Presents Packaging Interconnect Material Technology Series with Dr. Kazuhiro Nogita
09/09/2024 | iNEMIiNEMI, a leading electronics manufacturing industry association, is pleased to announce a two-part webinar series focusing on packaging interconnect material technology. Dr. Kazuhiro Nogita, a leading expert in the field, will present on September 17-24, 2024.