Keysight Expands Autonomous Driving Test Portfolio with Lidar Target Simulator
June 6, 2023 | Keysight Technologies, Inc.Estimated reading time: 1 minute

Keysight Technologies, Inc. is expanding its award-winning portfolio of autonomous driving validation test solutions with the E8717A Lidar Target Simulator (LTS), which enables automakers and lidar sensor makers to test and validate lidar sensors for autonomous vehicles (AV).
Initially developed for use in meteorology and topography, lidar is now being adopted as an automotive sensing technology that enables AVs to "see" and safely navigate through complex driving scenarios. As with radar-based systems, lidar sensor makers must ensure lidar systems quickly and reliably detect objects, enabling advanced driver assistance systems (ADAS) to work correctly before they are commercially deployed. To properly test sensors, designers currently need large floor spaces and use traditional target boards. In addition, the industry is also faced with reducing sensor cost and scaling to mass production.
The Keysight LTS solution addresses these challenges by simulating test targets at defined distance and reflectivity with a compact and standardized bench setup. This solution is designed to simplify and accelerate the testing, validation, and production of automotive lidar sensors through standardization and automation.
The following benefits are provided by the Keysight LTS:
- Small footprint covering large distances – Compact bench setup saves test floor space by simulating target distances from 3 meters to 300 meters and simulating surface reflectivity from 10% to 94%.
- Insightful analytics improve sensor design and performance – Powerful testing software generates insightful analytics by sweeping target distance and reflectivity, enabling design and performance improvements.
- Automated software accelerates testing – The LTS test setup is fully automated using a cobot and powered by Keysight PathWave Test Executive for Manufacturing for test automation. While the cobot provides precise device movement for field of view testing, the automation software accelerates testing and throughput to support volume production.
Thomas Goetzl, Vice President and General Manager for Keysight's Automotive & Energy Solutions, said: "Keysight sees an exciting role that lidar can play in enabling autonomous vehicles to navigate more accurately with an extra sensor that complements cameras and radars. With the market's first cobot-assisted lidar target simulator with variable distance and reflectivity simulation, we are ready to support a volume roll out of lidar with a scalable manufacturing test solution."
Suggested Items
TRI to Exhibit at SMTA Queretaro Expo 2025
07/16/2025 | TRITest Research, Inc. (TRI), the leading provider of test and inspection systems for the electronics manufacturing industry, is pleased to announce plans to exhibit at the SMTA Querétaro Expo 2025, scheduled to take place on July 24, 2025, at the Querétaro Centro de Congresos y Teatro Metropolitano.
Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
07/16/2025 | Nash Bell -- Column: Knocking Down the Bone PileIn 1983, the Department of Defense identified that over 40% of military electronic system failures in the field were electrical, with approximately 50% attributed to poor solder connections. Investigations revealed that plated finishes, typically nickel or tin, were porous and non-intermetallic.
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/16/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
TTCI Joins Printed Circuit Engineering Association to Strengthen Design-to-Test Collaboration and Workforce Development
07/09/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is proud to announce its membership in the Printed Circuit Engineering Association (PCEA), further expanding the company’s efforts to support cross-functional collaboration, industry standards, and technical education in the printed circuit design and manufacturing community.
Study on Resonance Mitigation in Metallic Shielding for Integrated Circuits
07/08/2025 | Maria Cuesta-Martin, Victor Martinez, Vidal Gonzalez Aguado, Würth ElektronikInherent cavity resonant modes often lead to significant degradation of shielding effectiveness, responsible for unwanted electromagnetic coupling. Cavity resonant modes of the metal shielding enclosure can produce two adverse problems: the mutual coupling among different RF modules and shielding effectiveness reduction of the metal enclosure. The cabinets serve to shield certain components from electromagnetic interference (EMI). However, these cavities present some resonance peaks at 5 GHz, making it impossible to use them at higher frequencies.