-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueSoldering Technologies
Soldering is the heartbeat of assembly, and new developments are taking place to match the rest of the innovation in electronics. There are tried-and-true technologies for soldering. But new challenges in packaging, materials, and sustainability may be putting this key step in flux.
The Rise of Data
Analytics is a given in this industry, but the threshold is changing. If you think you're too small to invest in analytics, you may need to reconsider. So how do you do analytics better? What are the new tools, and how do you get started?
Counterfeit Concerns
The distribution of counterfeit parts has become much more sophisticated in the past decade, and there's no reason to believe that trend is going to be stopping any time soon. What might crop up in the near future?
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
Going Green at SEL
August 23, 2023 | Barry Matties, I-Connect007Estimated reading time: 2 minutes
A Q&A with John Hendrickson, engineering director at Schweitzer Engineering Laboratories.
SEL is going green at its new 162,000-square-foot, environmentally friendly PCB manufacturing facility in Moscow, Idaho. As John Hendrickson explains, being a zero liquid discharge (ZLD) facility—a trend you are likely to hear more of in our industry—is not just a smart business decision, it’s driven by SEL’s core values.
Barry Matties: As far as waste treatment goes, this is a zero liquid discharge (ZDL) facility, correct?
John Hendrickson: Yes, it's zero discharge. We have zero drains in our manufacturing floor and zero drains in our water recycling room. The only drains we have are in our bathrooms and sinks; even the sinks in our lab are all pumped to our water recycling. There's no opportunity for somebody to dump something down the wrong sink.
We designed the factory with a chemical-resistant membrane underneath the facility. We designed the floor so that it slopes a little bit to the center. If we ever had a major spill on this floor, it would all go to the center of the floor and it would all be contained within the building. In the water recycling room, we dropped the floor six inches.
The way this system works is that we have two primary inputs in the system for our rinse waters, which we manage separately from our concentrate side. On the concentrate side, we take the material and drop the metals out and then change the pH. Then we take that through our filter press. So that's where our metals are, and that goes out for recycling.
Everything else will move over to what we call a pH batch tank. We adjust that to a pH of 7 and then we run that through our evaporators. After the concentrate goes to the evaporators, then we take it to a dryer, and we're still putting it under pressure and heat evaporating and then it goes back to the rinse inside. On the rinse side, we'll take it through ozone, then we'll destruct the ozone with UV. We run that through a GAC (granular activated carbon) column, through ion exchange columns, and then eventually run it through reverse osmosis. That’s how we generate our DI water.
Matties: Is this kind of thinking why the city got behind this factory?
Hendrickson: Yes. The fume scrubber and everything else definitely helped us with our EPA requirements. Visiting officials have all been very impressed by how clean the factory is and how we've managed some of these things. In fact, some of the things that we’re doing with this equipment have never seen an application in the state before.
Matties: Thank you, John.
This conversation appeared in the August 2023 issue of PCB007 Magazine.
Suggested Items
Rogers Announces Addition of Woon Keat Moh to Board of Directors
12/23/2024 | Rogers CorporationRogers Corporation announced that Woon Keat Moh ("Moh") has been appointed as an independent member of the Company’s Board of Directors, effective January 1, 2025. Following this change, the Board will be composed of nine members, eight of whom are independent.
Rogers Appoints Laura Russell as Chief Financial Officer
12/11/2024 | Rogers CorporationRogers Corporation announced that Laura Russell has been appointed to serve as the Company’s new Senior Vice President, Chief Financial Officer and Treasurer effective December 10.
SEMICON Japan 2024 Opens Tomorrow to Highlight Smart Applications Powered by Semiconductor Technology
12/10/2024 | SEMISEMICON Japan, the region’s premier microelectronics industry conference and exhibition, opens tomorrow at Tokyo Big Sight. With more than 1,000 exhibitors from 35 regions, the conference gathers leaders from across the microelectronics manufacturing supply chain from December 11-13. SEMICON Japan 2024.
Does China Plus One Actually Work?
12/10/2024 | Manfred Huschka, Manfred Huschka Management Consulting (Shenzhen) Ltd.We all know of the current geopolitical challenges between the U.S. and China, which have motivated companies to investigate shifting supply chains to other countries, including Vietnam, Thailand, Mexico, India, and Malaysia while continuing to source mainly from China. This strategy is being referred to as China Plus One. In this two-part article, I will summarize the current economic trends in China, and look at the trends in wider Southeast Asia.
TTM Technologies to Exhibit at the 2024 International Electronics Circuit Exhibition in Shenzhen, China
12/04/2024 | Globe NewswireTTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies and printed circuit boards (PCBs), announces that it will exhibit at the 2024 International Electronics Circuit Exhibition (Shenzhen).