-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLearning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
Training New Designers
Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What will PCB designers of the future need to master to deal with tomorrow’s technology?
The Designer of the Future
Our expert contributors peer into their crystal balls and offer their thoughts on the designers and design engineers of tomorrow, and what their jobs will look like.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
NEC Develops 150 GHz Antenna-on-Chip Transmitter IC Chip for Beyond 5G/6G Radio Equipment
October 12, 2023 | JCN NewswireEstimated reading time: 1 minute

NEC Corporation has developed a 150 GHz transmitter IC chip and supporting technologies in preparation for Beyond 5G and 6G mobile access radio communication systems. According to an NEC survey, this is the first demonstration of preferred beam steering performance with 4-channel Antenna-on-Chip (AoC) IC technology using On the Air (OTA) radiation pattern measurement. Based on innovative RF circuit design technology, it has become possible to integrate 150 GHz phased array antenna elements, phase shifters and transmission amplifiers into a single chip. The 22-nm SOI-CMOS technology used for manufacturing this IC is cost effective, suitable for mass production, and has the ability to support large scale integration of digital, analog and RF functionalities in a chip. This allows for both higher frequencies and smaller sizes, which also contributes to lower Total Cost of Ownership (TCO) and potentially accelerates social implementation.
Beyond 5G and 6G are expected to provide 100 Gbps class broadband communications that are more than ten times faster than 5G. To achieve this, it is effective to utilize the sub-terahertz band (100GHz to 300GHz), which can secure a wide bandwidth of 10GHz or more. In particular, the D-band (130 GHz to 174.8 GHz), which is already assigned for fixed wireless communication systems worldwide, is expected to contribute to early social implementation. However, since the sub-terahertz band is subject to large propagation losses, large interconnection losses and device performance is near its limit, there is a need for the development of highly directional, high-gain antenna technology and its beam steering technology. To overcome these challenges, NEC developed a new IC chip that supports the 150GHz band. Going forward, NEC will continue to develop advanced technologies with the aim of contributing to the commercialization of 6G that is expected in the 2030s.
Suggested Items
Incap Launches ‘Incap Legends’ esports Tournament and Invites Students from Around the World to Participate
03/31/2025 | IncapIncap Corporation is proud to announce the launch of ‘Incap Legends’, a new esports tournament in partnership with Newcastle and Stafford Colleges Group (NSCG).
Foxconn Chairman Young Liu to Deliver Keynote at COMPUTEX 2025
03/28/2025 | PRNewswireTAITRA (Taiwan External Trade Development Council), announced that Young Liu, Chairman of Hon Hai Technology Group (Foxconn), is invited to be the speaker at COMPUTEX 2025 Keynote, sharing his vision on three intelligent platforms driving industry transformation and the role of robotics in factories of the future.
MVTec, Pepperl+Fuchs Enter into Technology Partnership
03/27/2025 | MVTecMVTec Software GmbH and Pepperl+Fuchs are stepping up their technological collaboration in the field of machine vision. As part of this, Pepperl+Fuchs joined the MVTec Technology Partner program at the beginning of 2025.
DuPont Announces Board of Directors for the Planned Independent Electronics Company
03/27/2025 | PRNewswireDuPont announced the members of the future board of directors for the independent Electronics public company that will be created following its intended spin-off from DuPont.
HARTING 3D-Circuits Leads 3D-MID Innovation: Transforming Consumer Electronics with Advanced Technology
03/27/2025 | PRNewswireThe consumer electronics industry is experiencing a remarkable transformation, propelled by rapid technological advancements and an increasing demand for compact, efficient, and multifunctional devices. Central to this evolution is 3D-MID (Three-Dimensional Mechatronic Integrated Devices) technology, which redefines design standards and drives innovation.