-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueThe Rise of Data
Analytics is a given in this industry, but the threshold is changing. If you think you're too small to invest in analytics, you may need to reconsider. So how do you do analytics better? What are the new tools, and how do you get started?
Counterfeit Concerns
The distribution of counterfeit parts has become much more sophisticated in the past decade, and there's no reason to believe that trend is going to be stopping any time soon. What might crop up in the near future?
Solder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
Product Demand Remains Steady This Month, with Costs Continuing to Improve
November 3, 2023 | IPCEstimated reading time: 1 minute
With no major trend shifts over the last month, electronics industry sentiment was relatively unchanged from September. Product demand has held steady, with costs continuing to improve per IPC’s October 2023 Global Sentiment of the Electronics Supply Chain Report.
“In this month’s survey, we asked a special question about the use of artificial intelligence (AI) in electronics manufacturing,” noted Shawn DuBravac IPC chief economist. “Survey respondents indicated that AI is expected to be most useful for predictive maintenance, inventory management, quality control, supply chain management, and office support/activities over the next three years. However, fewer respondents believed AI would be useful for product development, lights-out facilities and sustainability.”
Additional survey data show:
- The New Order Index slipped one point, falling to 100. This is the lowest level for this index since data collection began. The index remains out of negative territory, but a further decline could be imminent.
- Both the Material Costs Index and the Labor Costs Index fell two points this month. This is a new low for the material costs measure.
- Over the next six months, electronics manufacturers expect to see continued, albeit relatively stable, increase in both labor and material costs.
- While profit margins are expected to improve, backlogs and ease of recruitment are likely to remain challenging.
- Backlogs are expected to rise more so among firms primarily operating in APAC, North America, and globally when compared to firms in Europe.
For the report, IPC surveyed hundreds of companies from around the world, including a wide range of company sizes representing the full electronics manufacturing value chain.
Suggested Items
PCB Design Software Market Expected to Hit $9.2B by 2031
11/21/2024 | openPRThis report provides an overview of the PCB design software market, detailing key market drivers, challenges, technological advancements, regional dynamics, and future trends. With a projected compound annual growth rate (CAGR) of 13.4% from 2024 to 2031, the market is expected to grow from USD 3.9 billion in 2024 to USD 9.2 billion by 2031.
IPC Issues Clarion Call for EU to Reclaim Leadership in Electronics Manufacturing
11/21/2024 | IPCIPC released a synopsis of its recent white paper, Securing the European Union’s Electronics Ecosystem. This condensed document presents a comprehensive overview of the current challenges in Europe’s electronics manufacturing industry and shares actionable steps to help the EU achieve a stronger, more autonomous ecosystem.
IPC Celebrates National Apprenticeship Week with a Focus on Electronics Manufacturing Excellence
11/19/2024 | IPCIPC, a leading global electronics industry association and source for industry standards, training and advocacy, is proud to announce its participation in National Apprenticeship Week, scheduled for November 17-23, 2024.
IPC Introduces First Standard for In-Mold Electronics
11/18/2024 | IPCIPC announces the release of IPC-8401, Guidelines for In-Mold Electronics. IPC-8401 addresses in-mold electronics (IME) technology, providing industry consensus on guidelines for manufacturing processes, part structures, material selection, and production test methods to integrate printed electronics and components into 3D smart structures.
Disruptive Innovation and Generative AI Inventor, Kevin Surace, to Keynote IPC APEX EXPO 2025
11/15/2024 | IPCEach year, IPC APEX EXPO features industry’s most dynamic, innovative minds to deliver keynote presentations that are both educational and entertaining. IPC APEX EXPO 2025 will feature Kevin Surace, an internationally renowned futurist and generative artificial intelligence (AI) innovator.