Global Citizenship: What I’ve Learned About the American PCB Business
Global Sourcing Spotlight: The Best Products to Buy Offshore Through Global Sourcing
Nolan's Notes: The Rise (and Risk) of Data
iNEMI Tech Topic Series: Counterfeit Components
December 4, 2023 | iNEMIEstimated reading time: 1 minute
The third session in iNEMI’s Counterfeit Components series which will be hold Thursday, December 7, 2023 / 11:00 a.m.—12:30 p.m. EST (US), will look at emerging technologies for detection and mitigation. We will also look at what is ahead for hardware security and review results of an industry survey regarding experiences with counterfeit components and strategies used to mitigate risk.
Topics and Speakers
- Use of LIBS (laser-induced breakdown spectroscopy), an analytical technique, to detect and characterize materials — Terry Munson (Foresite)
- Understanding counterfeit electronics detection and mitigation — Navid Asadi Zanjani (University of Florida)
- What’s next? Roadmapping smart manufacturing solutions for component/material assurance — Francis Mullany, PhD (iNEMI)
- Results of iNEMI survey regarding industry experiences with counterfeit components and strategies used to mitigate risk — Jennifer Muncy (IBM), Paul Hale (NIST), Terry Munson (Foresite), Ben German (Intel) and Mark Schaffer (iNEMI).
If you are interested in this topic but unable to attend, please register and we will send you a link to the presentation and webinar recording following the event. For additional information about speakers and agenda.
Registration
This webinar is free and open to industry; advance registration is required, check iNEMI's website.
Thursday, December 7, 2023
11:00 a.m. — 12:30 p.m. EST (US)
5:00-6:30 p.m. CET (Europe)
Share on:
Suggested Items
Counterfeit Detection: Cybord’s Accurate One-Two Punch
11/13/2024 | Nolan Johnson, I-Connect007To continue the counterfeit discussion from our October issue, I recently connected with Oshri Cohen, CEO of Cybord, to discuss advancements in both counterfeit detection and data analytics. To hear Oshri describe Cybord’s work is to realize that real-time counterfeit detection technologies can also contribute directly to improving process windows in production.
Combatting Advanced Techniques in Counterfeiting
10/30/2024 | Anthony BryantIn today's interconnected global marketplace, counterfeit electronics pose a significant threat to industries ranging from aerospace and defense to healthcare and telecommunications. As counterfeiters employ increasingly sophisticated techniques, the need for robust strategies to prevent, mitigate, and identify counterfeit components has become critical. This article explores the advanced techniques used in counterfeiting, the potential involvement of state-owned enterprises (SOEs), and comprehensive strategies for combating this pervasive issue.
Counterfeit Concerns: Navigating the Risks
10/23/2024 | Nolan Johnson, SMT007 MagazineNolan Johnson meets with Diganta Das, PhD, and Michael Azarian, PhD, research scientists at the CALCE Electronic Products and Systems Center at the University of Maryland, to discuss the increasing issue of counterfeiting in the electronics and assembly industry. Diganta and Michael highlight the need for robust detection methods and standards to mitigate risks, specifically referencing SAE AS6171 for inspection and AS5553 for counterfeit mitigation. They cover real-world cases, like counterfeit network equipment scandals to relatively simple issues of consumer electronics accessories to illustrate the complexity of the issue and debate the philosophical implications of labeling products that contain a few minor counterfeit components as “counterfeit.”
ERAI: The Counterfeit Watchdog
10/16/2024 | Nolan Johnson, SMT007 MagazineRick Smith is vice president of business development at ERAI, an organization founded in 1995 as a watchdog for the electronic component distribution section, aiming to combat bad business practices and counterfeiting. Rick definitely has some stories to tell about the hows and whys of counterfeiting, and breaks down some compelling numbers when it comes to fake parts being sold into the open market.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
10/11/2024 | Andy Shaughnessy, Design007 MagazineThis week’s roundup is a duke’s mixture of news items and interviews with industry experts from design, fabrication and assembly. There’s a lot going on in electronics now. We’ll be bringing you full coverage of SMTA International the week of Oct. 20-24, so stay tuned.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in