-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Book Excerpt: 'The Printed Circuit Designer's Guide to... Designing for Reality,' Chapter 2
January 4, 2024 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
This is an excerpt from Sunstone Circuit's book: The Printed Circuit Designer's Guide to... Designing for Reality by Matt Stevenson
Chapter 2: Variations in the Manufacturing Process
Once a CAD tool is chosen and the basics understood, the thought process should then shift toward the manufacturing of the PCB, before applying electrons to the screen. Let’s get the “bad news” out of the way first. Perfection is an unattainable goal. Don’t expect manufacturing to be perfect. There will always be variations from optimum at every step of every manufacturing process. Designers should recognize that variation and physical challenges within the PCB manufacturing process can be exacerbated by their design decisions. Not to worry, this is easily overcome with forethought during design and a good manufacturing partner.
According to the law of variation as defined in the Statistical Quality Control Handbook, 2nd Edition (January 1982):
- Everything varies. In other words, no two things are exactly alike.
- Groups of things from a constant system of causes tend to be predictable. If outcomes from systems can be predicted, then it follows that they can be anticipated and managed.
In a recent post for bizfluent, Beth Robinson identified the five main sources of process variation: raw materials, equipment, human actions, environment, and method.
Raw Materials
There will be variation in the output of all manufacturing processes and all suppliers.
The materials required in a manufacturing process come most often in either the form of a manufactured material or ore. These suppliers of manufactured material will experience variation during their production process, so there will inevitably be slight inconsistencies in the materials they supply. This can have a cascading effect, creating variations during PCB production and potentially impacting board performance. Raw materials like copper don’t always come from the same source, especially during times when supply chains are compromised (Figure 2.1). Manufacturers and designers may need to consider variations in purity and how they will affect the manufacturing outcome. There are specifications for most of these materials (copper cladding, laminate, etc.) that limit the variation to an agreed upon, acceptable range.
Continue reading the rest of this book at I-007eBooks.
Suggested Items
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
NEOTech Positions Itself as Microelectronics Industry Leader with High-Technology Investments
05/09/2024 | NEOTechNEOTech, a leading provider of electronic manufacturing services (EMS), design engineering, and supply chain solutions in the high-tech industrial, medical device, and aerospace/defense markets, announces a significant investment in acquiring new Palomar 8100 wire bonder machines, enhancing the company’s positioning as a leader of cutting-edge microelectronics assemblies for mission-critical applications.
MKS’ Atotech, ESI to Participate in CPCA Show
05/09/2024 | MKS’ AtotechMKS’ Atotech, and ESI will participate in the CPCA Show 2024. The show will be held from May 13 to 15, 2024, at the National Exhibition and Convention Center (Shanghai) and will bring together domestic and international manufacturers in the electronic circuit industry.
Dragonfly Energy Announces Breakthrough in Lithium Battery Production: Eliminating Harmful 'Forever Chemicals'
05/09/2024 | Globe NewswireDragonfly Energy Holdings Corp., an industry leader in green energy storage, has made a significant breakthrough in battery manufacturing with the successful production of PFAS-free electrodes in lithium battery cells.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.