-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
atg Luther & Maelzer and IEC Install A7Pro Flying Probe Tester at Toronto-based PCB Factory
February 19, 2024 | IECEstimated reading time: Less than a minute
![](https://iconnect007.com/application/files/8317/0845/5741/atg_A7pro.jpg)
Longest-serving distributor to the North American PCB industry, IEC (International Electronic Components) confirms that the atg Luther & Maelzer A7Pro, eight-head, double-sided, high-speed flying probe test system has been ordered and installed at a prominent PCB manufacturer in Toronto, Canada.
IEC President Shawn Stone says, “IEC attributes our longevity to the expertise and dedication of our sales team leaders, our loyal customers, and strategic partners such as atg Luther & Maelzer.”
atg’s A7Pro testers utilize eight flying probe test heads, multiple optical recognition systems, and a wide variety of advanced, high-speed electrical test measurement techniques to electrically test all types of PCBs for continuity and isolation. Board sizes of 24" x 21" (or larger), with small pad/fine pitch technology can be tested quickly and easily. Special options such as 4-wire Kelvin tests, hi-pot test, latent defect test, and others can be provided.
Suggested Items
Zero Defects International to Exhibit at Utah Expo and Tech Forum
09/04/2024 | Zero Defects InternationalZero Defects International [ZDI] has announced their participation as an exhibitor at the SMTA Utah Expo and Tech Forum. It will be held at the Salt Lake City Marriott University Park.
Takaya Exhibiting Flying Probe Test Technology at SMTAI 2024
08/29/2024 | TakayaTEXMAC, the exclusive authorized distributor of Takaya flying probe test systems in North and South America, will be exhibiting highlights of its advanced technology at SMTA International, October 20 - 24, 2024, at the Donald E. Stephens Convention Center in Rosemont, Illinois USA.
Saki to Showcase Cutting-Edge Total Inspection Line Solutions at Productronica India 2024
08/28/2024 | Saki CorporationSaki Corporation, an innovator in the field of automated optical and X-ray inspection equipment, is pleased to announce its participation at productronica India 2024, one of the premier trade events for the electronics manufacturing industry in the region.
Asymmetric Hybrid Printed Circuit Board Design: Warpage Considerations
08/27/2024 | Kaspar Tsang, Gause Hu, Jimmy Hsu, Aje Chang, Alan Sun, Brian Ho, Ryan Chang, and Thonas SuThe printed circuit board (PCB) accounts for a significant portion of the PCBA’s (printed circuit board assembly) BOM (bill of material) cost. Designs with hybrid PCB stackup are adopted to reduce the cost of the PCB by using less expensive laminate materials in layers that do not have routings for high-speed signals (e.g., power and ground layers). The conventional hybrid PCB stackup design is symmetrical in the middle. This engineering technique has been employed in the data center industry for quite some time. To extend the idea and optimize the purpose of hybrid PCB stackup design, the feasibility of an asymmetric hybrid stackup is currently being studied.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/16/2024 | Nolan Johnson, I-Connect007People are on the move, new books are being released, and a new PCB manufacturer is making waves. This week, I'm highlighting the latest ASC/Sunstone book on DFM essentials, our 40th book in the I-Connect007 library and a must-read whether you're a new or seasoned member of industry. I'm also including leadership news from NextFlex, a discussion on integrated passives from Joe Fjelstad, and a new processor chip from Intel meant specifically for automotive applications.