Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Punching Out: Should You Sell Your Company to a Private Equity Firm?
iNEMI Publishes Four Roadmap Topics
April 4, 2024 | iNEMIEstimated reading time: 2 minutes
The International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
“The in-depth content on these topics is intended to help companies align technology progress with their respective commercial interests and to support high-volume manufacturing,” says Francis Mullany, iNEMI Director of Roadmapping. “The new format provides a more structured, accessible view of the roadmap that is easily updated based on market movements and technology innovations. And, of course, the roadmap continues to chart the future evolution of electronics manufacturing in terms of application drivers, technical needs, gaps, and technical solutions over a 10-year horizon to help guide R&D investment decisions by industry as well as public research programs and government agencies.”
Initial Topics Include Technologies Critical to Complex Integrated Systems
This initial wave of roadmap topics focuses on key technologies and cross-cutting topics critical to complex integrated systems (CIS), as discussed in a recent iNEMI/IPC whitepaper “Complex Integrated Systems: The Future of Electronics Manufacturing." The scope of each topic area now available is described below.
Printed Circuit Boards — Printed circuit boards (PCBs) are a fundamental element of a vast range of electronic products. The PCB manufacturing ecosystem must continuously evolve and react to “technology blurring” with respect to substrates. The initial iNEMI Roadmap discussion of this topic covers a broad spectrum: high-speed PCBs and substrates; test, inspection and measurement; and environmental issues. Other topics currently under preparation include microwave and mmWave PCBs, laminate-based semiconductor packaging and PCB design.
Sustainable Electronics — Sustainability in the design, manufacture, use and end-of-life handling of electronics systems is an increasingly important consideration across the entire electronics manufacturing ecosystem. The iNEMI Roadmap currently focuses on the full scope of circularity and on key materials used. A new reporting format gathers information on sustainability hot-spot issues and roadmaps mitigating technologies on a per-substance basis.
Smart Manufacturing — The term “smart manufacturing” encompasses the adoption of informed, intelligent, automated manufacturing processes at factory, enterprise, and ecosystem levels for increased flexibility, resiliency and efficiency. The initial release of roadmap content looks at the central topic of data flow architecture and at the increasingly important issue of security of smart manufacturing systems and data.
mmWave Materials and Test — As part of the 5G/6G MAESTRO project, work on this topic was supported by the National Institute of Standards and Technology’s (NIST’s) Office of Advanced Manufacturing. It considers the challenges posed by the operation of electronics at mmWave frequencies and higher. The focus is on the materials and their characterization and electrical test, primarily for PCBs and packaging substrates.
Publication Schedule
In the coming months, the iNEMI Roadmap will:
Provide qualitative market driver assessments and quantitative requirements for multiple application areas
Map technology gaps and potential solution approaches for other critical technology topics such as board assembly, complex integrated systems, modelling and design
Build a dynamic online presence for the iNEMI Roadmap, collaborating closely with other industry roadmaps
Share on:
Suggested Items
Hon Hai Joins OpenUSD Alliance to Promote Standardized and Open Source Universal Scenario Description (USD) Technology
11/21/2024 | Hon Hai Technology GroupHon Hai Technology Group , the world’s largest technology manufacturing and service provider, announced that it has joined the Alliance for OpenUSD (AOUSD ) to support the construction of a 3D ecosystem and promote Cooperation among various industries around the world promotes the standardization of Universal Scene Description (USD ).
ESCATEC Appoints Steven Waterston to Lead Mechatronics Sales
11/20/2024 | ESCATECGrowth-focused, electronics manufacturing services (EMS) provider, ESCATEC, has appointed industry veteran Steven Waterston as a Director of Business Development, effective immediately. He will lead ESCATEC’s initiatives to secure new mechatronics projects globally, by leveraging on the Group’s expertise and technical capabilities in meeting the needs of OEMs in this market segment.
Flexible Thinking: Rules of Thumb: A Word to the Wise
11/20/2024 | Joe Fjelstad -- Column: Flexible ThinkingIn the early days of electronics manufacturing—especially with PCBs—there were no rules. Engineers, scientists, and technicians largely felt their way around in the dark, making things up as they went along. There was a great deal of innovation, guessing, and testing to make sure that early guidelines and estimates were correct by testing them. Still, they frequently made mistakes.
Global Citizenship: What I’ve Learned About the American PCB Business
11/20/2024 | Tom Yang -- Column: Global CitizenshipNavigating the complexities of the American PCB business has been an eye-opening experience. During my time in America, I have become more familiar with the American PCB business and doing business here. If I may, and with your indulgence, I would like to share my humble impressions of the American PCB industry and the American way of doing business, which I find interesting and admirable.
CHIPS for America Announces New Proposed $285 Million Award for CHIPS Manufacturing USA Institute for Digital Twins
11/19/2024 | U.S. Department of CommerceThe Biden-Harris Administration announced that the U.S. Department of Commerce and the Semiconductor Research Corporation Manufacturing Consortium Corporation (SRC) are entering negotiations for the Department to provide SRC $285 million to establish and operate a Manufacturing USA institute headquartered in Durham, North Carolina.