Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Punching Out: Should You Sell Your Company to a Private Equity Firm?
iNEMI Announces Results of Board of Directors Election
April 8, 2024 | iNEMIEstimated reading time: 1 minute
The International Electronics Manufacturing Initiative (iNEMI) announces results from its recent Board of Directors election. The consortium's members have added three new directors and re-elected three incumbents, effective April 1, 2024.
In addition, the Directors have elected Chan Pin Chong, Kulicke & Soffa, as the new Chair. He succeeds Mostafa Aghazadeh, Intel Corporation, who has been on the Board since 2013, chair since 2020, and will continue to serve as a member the Board.
Chong is a technology industry veteran with more than 29 years of engineering and operations experience in the semiconductor and electronics industry. He joined Kulicke & Soffa (K&S) in 2014 as Vice President of the Wedge Bonders business unit and was appointed Executive Vice President & General Manager of K&S Products and Solutions in December 2019. See bio.
Chong was re-elected to the Board in this recent election, along with Dr. Daniel Gamota of Jabil and Dr. Jennifer Muncy, IBM Systems. New to the Board are: Hidenori Abe, Resonac Corporation, Dr. Habib Hichri, Ajinomoto Fine-Techno USA Corporation and Dr. Vasu Vasudevan, Dell Technologies.
“We congratulate and welcome all of the returning and new members to the Board,” says iNEMI CEO Shekhar Chandrashekhar. “This group of individuals highlights the diversity of our membership and I believe they will do an excellent job of representing all members' interests along the electronics manufacturing value chain.”
“Our Board plays a very important role for iNEMI,” continues Chandrashekhar. “They have oversight regarding the policy, strategy and direction of the consortium, as well as operational authority. We are looking forward to working with Chan Pin in the months and years ahead as he takes over leadership of this group. We also want to thank Mostafa for his excellent leadership over the past four years and look forward to his continued guidance as a member of the Board.”
Share on:
Suggested Items
PCB007 Magazine: November 2024—Engineering Economics
11/18/2024 | I-Connect007 Editorial TeamThe real cost to manufacture a PCB encompasses everything that goes into making the product: the materials and other value-added supplies, machine and personnel costs, and most importantly, your quality. A hard look at real costs seems wholly appropriate.
Schweizer Electronic Lowers 2024 Financial Forecast Amid Challenging Market Conditions
11/06/2024 | Schweizer Electronic AGBased on the preliminary financial results for the first nine months of 2024 of the SCHWEIZER Group, the Executive Board has adjusted the forecast for the 2024 financial year.
One Partial HDI Technique: mSAP
11/05/2024 | Andy Shaughnessy, Design007 MagazineChris Hunrath, vice president of technology at Insulectro, believes that mSAP just might be the trick for designers considering partial HDI. As Chris explains, the materials and equipment required for the mSAP process are easily available, and the process is well established. This could be a great option for designers working with BGAs that have a pitch of 0.5 mm or less.
Real Time with... SMTAI 2024: SMTA Austin on the Grow
11/04/2024 | Real Time with...SMTAIIn this interview from SMTAI 2024, Nolan Johnson chats with SMTA Austin Chapter Treasurer Brad Pagano, who shares what he's learned in his first 10 months of board service with this growing chapter. His insights are good advice for board members in other chapters.
CEE PCB to Exhibit at Electronica 2024
10/31/2024 | CEE PCBTom Yang, CEO of CEE PCB, has announced that his company will be exhibiting at this year’s electronica 2024 to be held in Munich, Germany from November 12th through the 15th at the Trade Faire Center Messe München.