Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Suggested Items

Würth Elektronik Now an Infineon ‘Preferred Partner’

03/13/2025 | Wurth Elektronik eiSos
Würth Elektronik, one of the leading manufacturers of electronic and electromechanical components, is broadening its collaboration with semiconductor manufacturers.

Elementary Mr. Watson: Ensuring a Smooth Handoff From PCB Design to Fabrication

03/13/2025 | John Watson -- Column: Elementary, Mr. Watson
At the 2020 Tokyo Summer Olympics, the U.S. men's 4x100-meter relay team had high hopes of winning a medal. The team comprised some of the fastest sprinters in the world, but something went wrong. In a relay, four runners must smoothly pass their baton to the next runner inside a zone on the track. If a runner drops the baton or it’s passed outside the zone, the team risks disqualification. The U.S. team’s pass between the second and third runner was messy, slowing them down. By the time the last runner received the baton, the team had lost too much time. They finished sixth in their heat and didn’t qualify for the final.

Ventec International Group Announce Launch of VT-47LT IPC4101 /126 Prepreg for HDI

03/12/2025 | Ventec International Group
Ventec International Group announce launch of VT-47LT IPC4101 / 126 Prepreg. Are Microvia Failures Plaguing Your HDI Any Layer Designs? High-density interconnect (HDI) designs are pushing the envelope - higher layer count HDI relies on complex microvia designs: skip vias, staggered microvias, and stacked microvias in sequential laminations.

TI Introduces the World's Smallest MCU, Enabling Innovation in the Tiniest of Applications

03/12/2025 | PRNewswire
Texas Instruments (TI) introduced the world's smallest MCU, expanding its comprehensive Arm® Cortex®-M0+ MSPM0 MCU portfolio. Measuring only 1.38mm2, about the size of a black pepper flake, the wafer chip-scale package (WCSP) for the MSPM0C1104 MCU enables designers to optimize board space in applications such as medical wearables and personal electronics, without compromising performance.

Speaking the Same Language as Your Fabricator

03/12/2025 | Andy Shaughnessy, Design007 Magazine
We do indeed have a failure to communicate; designers and fabricators often seem to be talking past each other, which can lead to jobs being put on hold. We asked Jen Kolar, VP of engineering for Monsoon Solutions, and columnist Kelly Dack to share their thoughts on ways that we can break down the communication barrier between design and fabrication. As they point out, a design kickoff checklist and a solid review process can be invaluable tools in a designer’s toolbox.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © 2025 I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in