Airbus Achieves Eurodrone’s Preliminary Design Review
May 16, 2024 | AirbusEstimated reading time: 1 minute
The Eurodrone programme has successfully performed the Preliminary Design Review (PDR). Led by Airbus Defence and Space as prime contractor, this major programme milestone has been completed with OCCAR and representatives of the four customer nations (France, Germany, Italy and Spain) in the presence of the three Major Sub-Contractors (MSC), Airbus Defence and Space Spain, Dassault Aviation and Leonardo.
The PDR proves that the initial design of the aircraft has consistently matured, paving the way to proceed with the detailed design. It is the outcome of different technical assessments and evaluations conducted, such as Wind Tunnel Testing to confirm the aerodynamic configuration of Eurodrone, the overall design to ensure demonstration of operational capability, and the validation of a fully representative Digital Twin. From the very beginning, the Eurodrone programme benefits from both design philosophies – physical and digital.
Supported by and based on the knowledge already gathered, the Eurodrone programme enters into a new phase to reach the Critical Design Review (CDR), which will represent the final step and closure of architecture and system design.
“Performing the Preliminary Design Review for the development of Eurodrone represents an important step forward for this key European defence programme”, said Jean-Brice Dumont, Head of Air Power at Airbus Defence and Space. “It shows a real joint effort and collaborative spirit from all industrial partners and the Customer community to ensure European sovereignty and independence in this critical segment of unmanned long endurance ISTAR capability.”
Provided with innovative cutting-edge technology and designed to become one of the main pillars of any future combat air system, the Eurodrone will be an indispensable capability to facilitate international conflict prevention and crisis management, ensuring operational superiority to the nations, especially in the context of Intelligence, Surveillance, Target Acquisition and Reconnaissance (ISTAR) missions.
Suggested Items
Aismalibar to Showcase Thermal Management Solutions for EV Battery Systems at The Battery Show North America 2024
09/27/2024 | AismalibarAismalibar, a leader in innovative thermal management materials, will be presenting its newest solutions for electric vehicle (EV) battery systems at The Battery Show North America from October 7-11, 2024. Located at Huntington Place, Detroit, MI, Aismalibar will exhibit at booth 6231, unveiling a range of cutting-edge Thermal Interface Materials (TIMs) designed to improve the safety, performance, and longevity of EV batteries.
TSMC Expands Collaboration with Ansys by Integrating AI Technology to Accelerate 3D-IC Design
09/27/2024 | ANSYSAnsys and TSMC have expanded their collaboration to leverage AI for advancing 3D-IC design and develop next generation multiphysics solutions for a wider array of advanced semiconductor technologies.
Silicon to Systems: A Wake-up Call for the Industry
09/26/2024 | Andy Shaughnessy, Design007 MagazineDuane Benson, founder of Positive Edge, has been working with silicon and packaging for longer than some of our newer readers have been alive. We asked him to share his thoughts on silicon to systems, which Duane says is much more than a buzzword—it’s a wake-up call for the industry.
Connect the Dots: Designing for Reality: Outer Layer Imaging
09/26/2024 | Matt Stevenson -- Column: Connect the DotsWelcome to the next step in the manufacturing process—the one that gets the chemical engineer in all of us excited. I am referring to outer layer imaging, or how we convert digital designs to physical products. On a recent episode of I-Connect007’s On the Line with… podcast, we explained how the outer layer imaging process maps the design’s unique features onto the board.
Siemens Extends Collaboration with TSMC to Advance Integrated Circuit and Systems Design
09/25/2024 | SiemensSiemens Digital Industries Software today announced it has extended its longstanding collaboration with TSMC through multiple new development projects, product certifications and innovative technology enablement for the foundry’s newest process technologies.