The New Chapter: The Benefits of Continuing Education
Marcy’s Musings: Boosting Your Inner Layer Precision and Production Outcomes
It’s Only Common Sense: You’ve Got to Hustle
IPC APEX EXPO: Some Thoughts About Growth
May 16, 2024 | Dan Feinberg, I-Connect007Estimated reading time: 1 minute
After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
This event has grown from a group of the leading suppliers in the industry of the late 20th-century PCB fabrication industry—mostly focused in the U.S. at that time—to a global trade show that includes extremely impressive exhibits (and a few not-so-impressive ones) exhibiting PCB assembly, fabrication, and design manufacturing equipment; raw materials; process materials and chemicals; software and design tools; and components. These come from contract manufacturers and large suppliers of all sizes. If you attend IPC APEX EXPO, you can explore every segment and anything needed to design and build an electronic device, from the design to the assembled device. I think the next logical step would be to see the completed device shown and marketed at CES or in stores.
This year, many of us who were involved years ago in the dream of IPC having such a show were discussing how this event has grown in ability, complexity, and value over the past quarter-century. There is a lot of pride in how this event has matured. This includes the show floor, the design and fab meetings, the ability of senior management in all segments of the industry to discuss and plan for the future, and the valuable assets provided to assist those just entering the industry.
To read this entire article, which appeared in the 2024 issue of Show & Tell Magazine, click here.
Share on:
Suggested Items
Spotlight on PEDC: Filbert Arzola
12/19/2024 | Andy Shaughnessy, Design007 MagazineIPC and FED have teamed up to create a new PCB design conference in Vienna, Austria. The Pan-European Electronics Design Conference (PEDC) takes place Jan. 29-30 at the NH Danube City hotel in Vienna. Raytheon’s Filbert Arzola is presenting “Engineering and Adapting Model-based PCB Design in Step with Sustainability and Digital Twins” at PEDC. I asked Filbert to discuss what attendees can expect from his class.
Avnet Insights: Engineers Outline Opportunity for AI
12/19/2024 | AvnetFor the fourth consecutive year, Avnet, Inc. (Nasdaq: AVT) will release its Avnet Insights survey, which has been keeping a pulse on how engineers are responding to the market since 2021. This year’s survey examines technology’s new frontier: Artificial Intelligence, and the promise – and challenges – it presents for product design.
IPC/WHMA Launches Groundbreaking Online Course on Wire Harness Design
12/18/2024 | IPCIPC/WHMA is excited to announce the launch of its new online instructor-led training course, "Introduction to Wire Harness Design I," available now through the IPC EDGE Learning Management System.
The Companion Guide to 'Designing for Reality' by Matt Stevenson Now Available
12/19/2024 | I-Connect007I-Connect007 is excited to announce the release of "The Companion Guide to...Designing for Reality," written by Matt Stevenson of ASC Sunstone Circuits. This essential resource builds on the foundational insights presented in "The Printed Circuit Designer’s Guide to... Designing for Reality" and delivers advanced strategies for scaling PCB production.
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.