Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
Nolan’s Notes: Finding Your Sweet Spot
Standard of Excellence: Delivering Excellence—A Daily Goal
KYZEN to Highlight 3D Printing Process Resin Cleaners at RAPID + TCT
June 6, 2024 | KYZEN'Estimated reading time: 1 minute
KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at RAPID + TCT 2024, scheduled to take place June 25-27, 2024, at the Los Angeles Convention Center. The KYZEN clean team will discuss their safe and effective water and solvent-based solutions for sensitive 3D parts at Booth #2853.
KYZEN’s specially formulated cleaning chemistries, such as KYZEN 3D5420 and KYZEN 3D5701, are compatible with most cleaning systems on the market today and have proven to effectively remove resins and contaminants without damaging 3D-printed parts and molds. KYZEN partners with its customers to learn about their processes and cleaning challenges, providing not only cleaning chemicals but also cleaning solutions.
KYZEN 3D5420 is a water-based aqueous cleaning solution proven efficient in removing a variety of uncured resins and contaminants from Stereolithography (SLA) 3D printed parts.
Used for post-process cleaning, 3D5420 offers an operator safe and environmentally responsible alternative to IPA and TPM solvent cleaning processes. KYZEN 3D5420 provides a cost effective and free rinsing solution.
KYZEN 3D5701 is a cost-effective drop-in replacement for Tripropylene glycol monomethyl
ether (TPM) in solvent parts washing systems. 3D5701 will remove resins and contaminants from molds and Stereolithography (SLA) 3D printed parts. KYZEN 3D5701 has proven effective with many standard UV cured resins used in 3D printing processes.
KYZEN proudly provides effective solutions tailored to meet the unique cleaning challenges of the ever-evolving market for additive manufacturing post-process cleaning.
Share on:
Suggested Items
The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
07/08/2025 | Mike Konrad -- Column: The Knowledge BaseIn electronics manufacturing, there’s a dangerous misconception that cleaning and coating are standalone options, that they operate in different lanes, and that one can compensate for the other. Let’s clear that up now. Cleaning and conformal coating are not separate decisions. They are two chapters in the same story—the story of reliability.
KYZEN Focuses on Aqueous Cleaning and Stencil Cleaning at SMTA Ontario
06/09/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Ontario Expo and Tech Forum, scheduled to take place Tuesday, June 17 at the Venu Event Space in Vaughan, Ontario, Canada. KYZEN will be on-site to provide information about aqueous cleaning chemistry AQUANOX A4618 and the full line of AQUANOX products.
Key Insights on Photoresist for Defect Reduction
05/21/2025 | I-Connect007 Editorial TeamIn PCB manufacturing, understanding the intricacies of the photoresist process is crucial for achieving high-quality results. Industry experts Josh Krick, a technical service engineer at IEC, and Tim Blair, a PCB imaging specialist at Tim Blair LLC, share their knowledge on the essential stages of photoresist application, highlight critical advancements in materials, and discuss common defects encountered during production. They share best practices and innovative solutions to enhance the manufacturing process, reduce defects, and ensure efficiency and reliability in high-tech applications.
KYZEN to Focus on Aqueous Cleaning and Stencil Cleaning at SMTA Juarez
05/20/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Juarez Expo and Tech Forum, scheduled to take place Thursday, June 5 at the Injectronics Convention Center in Ciudad Jarez, Chihuahua.
KYZEN’s Adam Klett to Present at 2025 SMTA Electronics in Harsh Environments Conference
05/05/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, announced today that Director of Science Adam Klett, PhD will present during the technical conference at the 2025 SMTA Electronics in Harsh Environments Conference.