-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueCounterfeit Concerns
The distribution of counterfeit parts has become much more sophisticated in the past decade, and there's no reason to believe that trend is going to be stopping any time soon. What might crop up in the near future?
Solder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
A Culture of Thriving
One cannot simply command thriving; it must be nurtured, developed, and encouraged. In this issue, we explore strategies to improve your working relationship model—both internally and externally. In this culture of thriving, your business will grow in the process.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
Overconstrain? Underconstrain? Selecting Materials for High-speed Designs
June 6, 2024 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
When selecting materials for a high-speed design, you need to be very familiar with the materials’ electrical characteristics, as well as the requirements of the PCB you’re designing. There are myriad details that need to be considered during the material selection process, and missing one iota can lead to your job being put on hold.
We asked Stephen Chavez, principal technical product marketing manager at Siemens, to share his thoughts on material selection for high-speed designs. Steph discusses material constraints, stackups, and the cut-off point when a “traditional” laminate will (and won’t) work for a high-speed board.
Andy Shaughnessy: What do designers need to keep in mind when selecting materials for a high-speed design?
Stephen Chavez: Regarding high-speed design, paying close attention to details is more critical than ever. This starts with dialing in and locking down a good foundation for the PCB, which is the stackup. The PCB stackup comprises the appropriate materials and structures to meet the design requirements and performance expectations. Locking in a good PCB stackup can be challenging, if not overwhelming when it comes to material selection.
Today, there exists a wide array of materials available for selection, encompassing diverse electrical, thermal, and other critical properties. Choosing the appropriate dielectric material hinges on the required frequency range and operational environment. As demands shift from conventional dielectric constants and thermal attributes (such as Tg and Td), there may be an associated increase in material costs as we move from standard materials to the more exotic materials. Materials boasting the lowest Dk and Df values tend to be pricier and may suffer from limited inventory availability, significantly impacting lead times. Where the Dk value is known as dielectric constant or relative permittivity, and the Df value is the dissipation factor or loss tangent, it tells a designer how lossy (electrical energy loss) a material may be. In simpler terms, it defines the ability of an insulator to store energy. It measures a material's ability to store electrical energy in an electric field. Additionally, when signal integrity and signal loss are critical, the micro-topography of copper foil cladding requires considerable attention. Numerous low-profile foils are available to mitigate and address signal loss.
To read this entire article, which appeared in the May 2024 Design007 Magazine, click here.
Suggested Items
DELO Introduces UV-approach for Fan-out Wafer-level Packaging
10/25/2024 | DELODELO has developed a new approach for fan-out wafer-level packaging (FOWLP). Its feasibility study shows: With the use of UV-curable molding materials instead of heat curing ones, warpage and die shift can be reduced significantly. Additionally, this leads to improvements in curing time and minimizes the energy consumption.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
Global PCB Connections: Mission Critical—Communication Between PCB Designers and Fabricators
10/24/2024 | Jerome Larez -- Column: Global PCB ConnectionsIn my first column, I want to discuss the critical importance of communications between the PCB design and the PCB fabrication engineer. I’ll explore why clear communication is so important, highlight the differences between standard and CTQ items, and outline the key issues that must be agreed upon to achieve success in PCB manufacturing.
Untapped Potential: Automating Warehouse Management Into the Present
10/15/2024 | Josh Casper, Horizon SalesThe push toward automation in electronics manufacturing has led to significant improvements in SMT and through-hole technology (THT) production. Today’s manufacturers are outfitted with precision pick-and-place machines, sophisticated inspection systems, and advanced solder deposition solutions. These investments reflect a broader industry trend toward automating high-value production tasks to boost efficiency, improve quality, and reduce headcount in a shrinking labor market. While the spotlight has rightly focused on automating SMT production, one crucial area remains woefully under-invested: materials storage and handling.
Ventec Promotes Bill Wang to Group Technical Vice President
10/14/2024 | VentecVentec International Group, a Taiwan Stock Exchange listed global supplier of advanced base materials for the PCB industry worldwide, has promoted Bill Wang to Group Technical Vice President.