I-Connect007 Editor’s Choice: Five Must-Reads for the Week
June 7, 2024 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
It’s been a great week. I spent part of the week at PCB East, which was held at the Boxboro Regency in Boxboro, Massachusetts. I haven’t been to Boxboro in about 20 years. The last time I was at PCB East in Boxboro, design instructor Mary Sugden had a hot plate and a supply of bologna in her room, because she preferred fried bologna to anything she could get in a restaurant. Never a dull moment with PCB designers!
PCB East has been growing since it re-opened a few years ago. The conference was well attended, and Wednesday’s expo was busy all day long. These one-day tabletop shows are the way to go, as we’ve seen lately with the success of SMTA’s local shows. I’ll have a post-show write-up next week.
But I’m glad to be home. Here’s a roundup of this week’s top news as you head into the weekend.
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
Published December 8
Technology Editor Happy Holden has been following the growing development of “bend-to-install” or “semi-flex” materials. In this update, Happy breaks down the details of this process, which, unlike flexible circuits, utilizes standard FR-4 materials and processes. We’re seeing a lot of “hybrid” processes like this now, and we’ll continue to follow this technology.
My Experience as an International Student
Published June 5
It must be really stressful being an international student; I had a hard enough time graduating from college in the country where I was born. But Palash Vyas is a little more of a go-getter than I was, to say the least. In this article, the recent doctoral graduate outlines his path from Mumbai to Auburn University, his volunteer efforts with IPC and SMTA, and winner of Best Poster Award at this year’s IPC APEX EXPO.
The Pulse: Overconstraining: Short, Slim, and Smooth
Published June 6
As columnist Martyn Gaudion says, small is beautiful in high-speed design and high reliability. To avoid overconstraining your high-speed board, Martyn explains why keeping things “short, slim, and smooth” are watchwords and why designers must take cost and DFM into account with each design.
Has It Really Been Survival Mode?
Published June 6
This is a topic that we’ve been hearing about for years: Companies in the EMS industry that are doing well have done so by being in “survival mode” for years. But is that really the case? Mark Wolfe examines this issue, starting with the four questions that each EMS manager answers before accepting every job.
Advancing PCB Technology: A Conversation With John Johnson
Published June 4
In this audio interview, John Johnson of American Standard Circuit discusses the industry’s continued movement toward finer lines and spaces and additive processes, as well as the need for a “mindset shift” and training in order to meet the needs of this new technology. He also discusses the need to focus on cleanliness and material adhesion with ultra-fine lines.
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
AI Triggers Next Paradigm Shift in PDN
10/23/2025 | Istvan Novak, SamtecArtificial intelligence (AI), together with machine learning (ML), is creating an unprecedented surge of computing and networking infrastructure needs. This, in turn, has dramatically increased the power consumption of computing and networking chips.
The Chemical Connection: Onshoring PCB Production—Daunting but Certainly Possible
10/22/2025 | Don Ball -- Column: The Chemical ConnectionIn the past year, several potential customers, concerned about the impending application of tariffs on incoming goods, have asked us what it would take to bring their circuit board production back to the U.S. While they also had other considerations, the threat of new tariffs was the tipping point that started them thinking about the economic advantages of bringing their manufacturing back onshore. It might be interesting to relate our experiences with two of those inquiries.
Waging the Battle for American PCB Reshoring
10/21/2025 | Marcy LaRont, PCB007 MagazineLegislation is shaping global trade, tariffs, and sustainability and environmental regulations. David Schild of PCBAA discusses exactly where the U.S. stands in its efforts to reshore printed circuit board manufacturing for critical industries. This conversation at PCB West occurred on the first day of the federal government’s shutdown, so it seemed especially timely to hear David's thoughts and insights on how the current political climate is affecting efforts to achieve the U.S. industry’s reshoring goals.
Dutch Government Takes Control of China-Owned Chipmaker Nexperia, Citing Security Concerns
10/14/2025 | I-Connect007 Editorial TeamThe Dutch government has taken control of Chinese-owned chipmaker Nexperia, escalating tensions with Beijing amid intensifying global disputes over semiconductor technology and intellectual property.
SEMICON West: The Path to a $1 Trillion Future
10/14/2025 | Marcy LaRont, I-Connect007After more than 50 years in San Francisco, SEMICON West moved its 2025 show to Phoenix, which is significant because it highlights the importance of Arizona as a semiconductor and tech hub. Though the show will be back in San Francisco in 2026, the overwhelmingly warm welcome SEMI received from Arizona Governor Katie Hobbs, Phoenix Mayor Kate Gallego, and ASU President Michael Crowe—who has been responsible for ASU repeatedly achieving the U.S. News and World Reports most innovative university ranking—was remarked upon repeatedly. All indications are that SEMICON West may well be back in Phoenix after that 2026 season.