Learning with Leo: Drones—Meeting Demand Without Compromise
Nolan’s Notes: Our Spotlight on North America
Global Sourcing Spotlight: Building a Supply Chain That Bends, Not Breaks
IPC/iNEMI Webinar on Circularity Challenges in Electronics Manufacturing
July 2, 2024 | iNEMIEstimated reading time: 1 minute
IPC and iNEMI held a workshop with industry experts at the Electronics Goes Green conference in Berlin last month to discuss circularity challenges in electronics manufacturing. The workshop — "There’s no end to a circle: A workshop on how to address circularity challenges in electronics manufacturing" focused on scoping industry solutions to address pressing circularity challenges.
Join us for this webinar to learn more about workshop results and discuss next steps that will lead to work by iNEMI and IPC to assist industry with: Scope of Work statements for new industry standards, tools, and education Ideas for solutions to address the identified problems.
Next steps and additional workshop opportunities. Solutions driven by industry collaboration will help enable efficient and effective adoption of circularity through the electronics manufacturing value chain.
Presenters
Kelly Scanlon, IPC
Lead Sustainability Strategist
Mark Schaffer, iNEMI
Project Manager
Registration
This webinar is for people who attended the EGG workshop as well as those who could not attend but would like to join the conversation. We will be continuing — and building on — the discussion about solutions needed to enable circular economy principles in the electronics industry. The webinar is open to industry; advance registration is required (see link below). If you have any questions or need additional information please contact Mark Schaffer (marks@inemi.org)..
Wednesday, July 17, 2024
10:00-11:00 a.m. EDT (Americas)
4:00-5:00 p.m. CEST (Europe)
10:00-11:00 p.m. CST (China)
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/08/2026 | Marcy LaRont, I-Connect007This week, I’ve selected some outstanding interviews that you’ll want to take note of. First, is a roundtable discussion featuring three dynamic industry cybersecurity experts. Please watch this important discussion that affects us all. Following that, I spotlight the IPC-2581 Consortium, which explains why IPC-2581 is the standard to replace Gerber data for manufacturing. Next, I am including my interview with PCBAA and AAM, who collaborated to release a short documentary on U.S. PCB manufacturing.
Hall of Fame Spotlight Series: Highlighting Karen McConnell
05/07/2026 | Dan Feinberg, I-Connect007In 2021, Karen McConnell was awarded the Raymond E. Pritchard Hall of Fame award in recognition of her contributions to the Association and the electronics industry. As a senior staff member and CAD/CAM engineer at Northrop Grumman Enterprise Services, her primary responsibility was to develop a common, shared EDM (Electronic Document Management) library to support the electrical and PCB design tool initiatives across Northrop Grumman Mission Systems.
A Necessary Shift From Gerber to IPC-2581
05/07/2026 | Tracy Riggan, Global Electronics AssociationIPC-2581 is an open, vendor-neutral data exchange standard developed by the Global Electronics Association to streamline the exchange of PCB design information across fabrication, assembly, and test. It replaces multiple legacy formats—including industry standards, Gerber, and ODB++—with a single, comprehensive, XML-based dataset that captures all manufacturing details.
Meet Emerging Engineers: Patrick Owen and Eric Mickenbecker, Summit Interconnect
05/05/2026 | Michelle Te, I-Connect007Patrick Owen and Eric Mickenbecker both work for Summit Interconnect, and are in their second year of the Global Electronics Association’s Emerging Engineer Program with mentor Brian Chislea. They stopped by the I-Connect007 booth at APEX EXPO and shared a bit of their story with me. Patrick has worked at the Hollister, California, plant since 2018, while Eric has been at the Chicago site since 2023. Like many of their peers, they came to the electronics industry from different paths, but are both excited about making an impact.
PCBAA, AAM Take on the Fight to Rebuild U.S. Manufacturing in New Documentary
05/05/2026 | Marcy LaRont, I-Connect007Throughout most of the 20th century, manufacturing was central to the American Dream of providing stable jobs and pathways to upward mobility. Today, more than 80% of global electronics manufacturing capacity resides in China and greater Asia, raising serious concerns about supply chain resilience and national security.