Share on:

Share on LinkedIn Share on X Share on Facebook Share with email


Advanced Electronics Packaging Digest

Subscribe

Stay ahead of the technologies shaping the future of electronics with our latest newsletter, Advanced Electronics Packaging Digest. Get expert insights on advanced packaging, materials, and system-level innovation, delivered straight to your inbox.

Subscribe now to stay informed, competitive, and connected.

Suggested Items

Epec Acquires Standard Printed Circuits Expanding U.S. PCB Manufacturing Capabilities

11/19/2026 | Epec Engineering Technologies
Standard Printed Circuits and Epec Engineered Technologies announce that Epec has completed the acquisition of Standard Printed Circuits, further expanding Epec’s domestic manufacturing footprint and high-technology printed circuit board capabilities.

Insoluble Anodes: Process Control for an Ever-shrinking World

11/19/2026 | Movses Gasamanyan, all4-PCB
Every generation of printed circuits asks more of the plating line. Traces are narrower, microvias are smaller, and copper thickness tolerances are tighter. What was once a rounding error now shows up as impedance drift, uneven via fill, and lost yield. At microscopic scale, whatever you don't control ends up controlling you. In a conventional acid copper bath, soluble anodes do two jobs at once: They carry current, and they supply copper ions by dissolving. That second job is the problem.

Marcy’s Musings: A Turkey to Remember

11/19/2026 | Marcy LaRont -- Column: Marcy's Musings
It’s November, and that means it’s turkey time for many of us. While the origins of Thanksgiving have become the subject of debate, the turkey’s place at the center of the table remains largely undisputed. Personally, I find turkey delicious. Yet somewhere along the way, this beloved bird became slang for a loser or a dud, presumably thanks to its reputation for being, well, not terribly bright.

Designing PCBs for Heat Staking: The Hole, the Head, and the Copper Around Them

11/18/2026 | Alex Spurgeon, U.S. Heatstake
An engineer once sent us a board that had passed every electrical test his team could throw at it: in-circuit test, functional test, and a week of burn-in. Six months into the field, units started coming back with cracked ceramic capacitors and one intermittently open BGA. The schematic and solder were fine. The failure analysis traced it to the assembly step that nobody had questioned: The board was being ultrasonically staked into its housing, and every unit had taken a dose of 20 kHz vibration inches from its most fragile components. High-frequency vibration has its place in assembling plastic components, but next to a ceramic capacitor, it may as well be a paint mixer.

Taking Stock of the New Forced-Labor Tariffs

11/17/2026 | James Kim, Arentfox Schiff LLP
This month, I’m looking at the new Section 301 “forced labor” tariffs, which are having a sweeping effect on many key inputs into the electronics supply chain. I’ll review what the U.S. government is doing to enforce these new tariff measures, including tightening requirements for who can import goods into the country. If your operation imports a server, bare board, power supply, connector, cable assembly, or finished device, a single purchase order may now be subject to multiple tariff systems before it reaches your warehouse.
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in