-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueWet Process Control
In this issue, we examine wet processes and how to obtain a better degree of control that allows usable data to guide our decisions and produce consistently higher-quality products.
Don’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
Material Matters
Materials management is nuanced, multifaceted, and requires a holistic systems approach for business success. When building high mix, low volume, and high technology, managing materials and overall cost containment are even greater challenges.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
iNEMI Packaging Tech Topic Series: Damage-Free Rapid Electron Beam Testing for Advanced Packaging
July 24, 2024 | iNEMIEstimated reading time: 1 minute
![](https://iconnect007.com/application/files/5117/2113/7233/PeterD.Nunan.jpg)
Testing issues are limiting chip makers’ ability to create larger SOCs (system-on-chip). The scan field dimensions of EUV (extreme ultraviolet light) and NA (numerical aperture) EUV, which are typically used for testing, are too small. To enable larger chips, manufacturers are migrating to system-on-a-package (SOP). This transition requires segmenting the final chip into many chiplets/tiles and reassembling the components using a combination of interposers, base tiles, EMIBs and substrates.
The active chiplets/tiles, such as CPU cores, GPUs, memory and I/Os, are tested the same as SOCs, with advanced logic testers and BIST (built-in self-test). BIST is made possible by the active silicon within the chiplets/tiles. The interposers, base tiles, EMIBs and substrates, which are the building blocks of SOPs, lack the active silicon to make traditional testing possible. To test these foundational building blocks of SOP, massive electrical contacting arrays of probes have been used. This method is slow, expensive, inflexible, and worst of all, can damage the device under test.
Applied Materials’ Yield Technology Group (YTG) has developed a non-contacting electron beam tester to enable testing of SOP building blocks. This presentation will introduce the Applied Materials damage-free electron beam testing method that can ensure high yield of SOP building blocks.
About the Speaker
Peter D. Nunan
General Manager Emeritus
Yield Technology Group, Display & Flexible
Technology Group
Applied Materials, Inc.
Peter D. Nunan spent 30+ years in semiconductor yield improvement. He started at Bell Laboratories in 1979, working on semiconductor yield equipment. In 2014, he assumed the role of General Manager of the Applied Materials Display Yield Technology Group (2014 to 2024). The stated objective of YTG is to bring semiconductor yield methods and equipment to the display and advanced packaging industries. The group’s goal is to enable display and advanced packaging manufacturers to develop and produce advanced displays, interposers and substrates. Prior to joining Applied Materials, Peter held various positions within the semiconductor industry, including Vice President of Varian Semiconductor Technology Development and Vice President-General Manager of KLA-Tencor’s Professional Services Division.
Registration
This webinar is open to industry; advance registration is required (see link below).
August 6, 2024
9:00-10:00 a.m. EDT (Americas)
3:00-4:00 p.m. CEST (Europe)
10:00-11:00 p.m. JST (Japan)
Register for this webinar
Suggested Items
iNEMI Packaging Tech Topic Series: Damage-Free Rapid Electron Beam Testing for Advanced Packaging
08/01/2024 | iNEMITesting issues are limiting chip makers’ ability to create larger SOCs (system-on-chip). The scan field dimensions of EUV (extreme ultraviolet light) and NA (numerical aperture) EUV, which are typically used for testing, are too small.
Strip Etch Strip: Episode 9 of On the Line With... Designing for Reality Podcast Now Available
07/25/2024 | I-Connect007Don't miss the latest episode of "On the Line With... Designing for Reality," where we walk through the PCB manufacturing process. At this stage, we have a panel made up of all the internal layers laminated together, through-holes drilled, and the outer layer copper features covered with a protective layer of tin.
DIS: Thriving With New Processes and Technologies
07/23/2024 | Barry Matties, I-Connect007What does it take to really thrive in today’s business environment? Will it require big changes, or can you make small, incremental improvements? Jesse Ziomek, global sales director and product manager at DIS, Inc., a company that designs and manufactures automation equipment, focuses on strategies for thriving in the PCB industry by emphasizing cost reduction through smart robotic solutions and addressing bottlenecks to optimize yields.
iNEMI Packaging Tech Topic Series: Damage-Free Rapid Electron Beam Testing for Advanced Packaging
07/16/2024 | iNEMITesting issues are limiting chip makers’ ability to create larger SOCs (system-on-chip). The scan field dimensions of EUV (extreme ultraviolet light) and NA (numerical aperture) EUV, which are typically used for testing, are too small. To enable larger chips, manufacturers are migrating to system-on-a-package (SOP).
Siemens Advances Integrated Circuit Test and Analysis at 5nm and Below
07/09/2024 | SiemensSiemens Digital Industries Software introduced Tessent™ Hi-Res Chain software, a new tool designed to address the critical challenges faced by integrated circuit (IC) design and manufacturing teams in advanced technology nodes, where even minor process variations can significantly impact yield and time-to-market.