The Government Circuit: News on Defense Electronics, Europe, and Sustainability
American Made Advocacy: Taking the Fight to Capitol Hill
Defense Speak Interpreted: SWaPing Nanosatellites for Defense Systems
From Concept to Reality: Building Alpha Circuit
August 14, 2024 | Barry Matties, I-Connect007Estimated reading time: 2 minutes
You’ve just sold your pharmaceutical business and have a lot of extra cash. Where would you spend it? “On a new 45,000-square-foot factory to manufacture high-tech printed circuit boards,” said one man.
Meet Prashant Patel, one of the industry’s newest PCB fabricators. Prashant was a pharmacist for his entire career and did very well. Surrounded by friends with decades of PCB industry experience who willingly shared their outlook on the industry, Prashant decided to acquire Alpha Circuit in Elmhurst, Illinois, in 2021. Alpha Circuit was established in 1981, where the primary focus had been on low-tech. That has all changed.
Prashant and his team broke ground on a new 45,000-square-foot building in Schaumburg, Illinois—meaning this factory was being built from the ground up. Keep in mind that Prashant had no experience in PCB fabrication and had to learn everything, literally, from the ground up. After spending a few hours with him, it’s easy to see he is a good student.
The following interview highlights Prashant's PCB journey.
Barry Matties: We’re here at Alpha Circuit’s brand-new facility, a project that has taken three and a half years. Prashant, tell us about the journey of setting up this new facility. Why did you undertake it this way, and how was the process of bringing it together?
Prashant Patel: I wanted to do something in the manufacturing industry, where I have an extensive network of friends and family. We purchased this building, and everything other than the four walls is brand new, including the flooring, lights, HVAC, roof, and equipment.
We did the factory floor layout and sourcing of equipment ourselves. With over 25 years of experience and expertise in the industry, our engineering team knew what they were looking for. You have to know the right questions to ask for each process. If it’s a wet process, how do we want the nozzles? How do we want the angles? How do we want the brushes? They are the experts, so I let them define exactly what we wanted and needed. My part was to find the manufacturers that could give us the best equipment that met all our requirements, including what kind of service they would offer. How soon can a technician get to you if something is not working? Service was the second most important consideration. After those two variables, it was lead time. When could we get the equipment? What can we live with, and what can't we live with?
Matties: You bought the nearby Alpha Circuit facility in Elmhurst in January 2021 and then started building this. Are you building this facility so that you can offer high-tech, leading-edge products that will be built here?
Patel: This new facility is almost 46,000 square feet compared to our other location, which is about the same size. Yes, this new facility is meant for more high-tech work—smaller lines and spacing, smaller BGAs. The new equipment we have can do all of it.
To read this entire conversation, which appeared in the July 2024 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
Flexible Thinking: Musings on High Density Interconnections
10/30/2024 | Joe Fjelstad -- Column: Flexible ThinkingPeople have been using high density interconnection (HDI) technology since the early 1980s, although it was not called HDI until the late 1990s. In the 1970s, ’80s, and early ’90s, engineers used HDI methods to develop hybrid circuits, which were later referred to as multichip modules (MCMs). These were arguably the first instantiation of heterogeneous interconnection technology, which has been the industry buzzword for almost a decade. These devices are a way of integrating multiple chips—both integrated circuits and discrete devices (resistors, capacitors, and inductors)—into a single package, typically using ceramic substrates with layers of insulation and metallic inks (often gold) and firing them at high temperatures.
Scanfil Continues to Succeed in Defending its Profit Margin in Challenging Market
10/29/2024 | ScanfilScanfil updated its outlook for 2024 on 10 June. Scanfil estimates its turnover to be EUR 780–840 (previous, issued on 23 February: 820–900) million, and an adjusted operating profit of EUR 54–61 (57–65) million.
The Chemical Connection: Troubleshooting PCB Process Problems
10/29/2024 | Don Ball -- Column: The Chemical ConnectionAs a supplier of PCB wet processing equipment, we inevitably find ourselves involved in helping customers solve sudden process problems that may or may not be caused by equipment malfunctions. For the most part, equipment problems are relatively easy to identify and repair: sensors for chemistry and equipment control, clogged nozzles and filters, leaks in the plumbing, etc. But what happens when the equipment checks out and the problem is still there?
SMTAI Returns to Its Chicago Roots
10/28/2024 | Nolan Johnson, SMT007 MagazineSMTA International, the anchor conference and exhibition for SMTA, returned to the Stephens Convention Center in Rosemont, Illinois, Oct. 20–24. After a COVID hiatus, followed by two years of co-locating with the MDMA show in Minneapolis, SMTAI went back to its Chicagoland home turf. The 2024 installment of the SMTAI event included more than 110 exhibitors, co-location with The ASSEMBLY Show, over 100 technical papers in the conference, technical forums, social activities, and renewed enthusiasm in the attendants.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
10/25/2024 | Marcy LaRont, I-Connect007Just this month, the Fall issue of IPC Community was released, spotlighting the global activities of IPC and its members. SMT007 Magazine covers the scary situation around counterfeit components. Design007 Magazine is not playing tricks with its hard-hitting discussions about “partial HDI.” (If you are asking yourself what that is, you really need to take a look.) Finally, PCB007 Magazine’s alternate metallization issue offers some real treats, including an interview featured this past week with Carmichael Gugliotti of MacDermid Alpha. In you’re in the U.S., here’s to an early Happy Halloween.