Maximizing ROI Through Better Wet Process Control
August 20, 2024 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes

Mike Carano is a program manager and SME for advanced packaging and PCB technologies at Trusted Semiconductor Solution. He has more than 40 years of experience in the electronics industry, with special expertise in manufacturing, performance chemicals, metals, semiconductors, medical devices, and advanced packaging.
For this issue, we reached out to Mike to learn more about how dialing in on wet process can benefit your bottom line.
“When things get out of control, the variation in your wet process begins,” Mike says. “Just because they look like good boards and may even pass electrical test, it does not necessarily mean you have good boards. Once the chemistry is headed toward the right or left side of the process control parameter cliff, the plating is compromised. If the copper is thinner than it should be, when the customer puts it into service, the board may fail after 500 cycles vs. the requisite 1,000 or 2,000 cycles. The root cause issue is that you plated 7/10ths of a mil of copper instead of one-mil of copper because you were not controlling your process. The fact that you passed your own electric test becomes inconsequential.”
What he’s really talking about is the need for a paradigm shift “where tight control of your processes is the way you manage your organization, wet process being one particular and crucial area of operations.”
With respect to process control, he tells his clients, “you have to stop thinking like a fabricator and think more like a semiconductor company.” Don't be solely reliant on your suppliers’ technical support to do the job either, he adds, because by then, it could be too late. “We all need to be laser-focused on precision. We need to be better at what we do. Perfection may not be attainable, but we should strive to get as close as we can. You achieve that through process control, which encompasses the critically essential skills of troubleshooting, root-cause analysis, problem-solving, and strategizing.
Marcy LaRont: Mike, PCB fabricators care about quality and yield because it ultimately translates to cost and profitability. Today, we also have sustainability goals and requirements. What should be the priorities in tightening up control?
Mike Carano: It has been frustrating over the years to witness the general lack of ability to troubleshoot and solve problems in some of the places I visit, which is why I write articles and present courses on advanced troubleshooting. I often see a “teeter-totter” mindset, this conundrum that you must sacrifice either quality or productivity and that somehow you can’t have both. Of course, the manufacturing folks err toward greater productivity, so you always have control over all your processes in real-time. Things will always go wrong. But when you simply rely on mass inspection, and don’t focus on process control, costs and rework go up, and productivity ultimately declines, all because of an imperfect system.
To read the rest of this article, which appeared in the August 2024 issue of PCB007 Magazine, click here.
Suggested Items
In Pursuit of Perfection: Defect Reduction—May 2025 PCB007 Magazine Now Available
05/15/2025 | I-Connect007 Editorial TeamFor bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In the May 2025 issue of PCB007 Magazine, we examine the imaging, etching, and plating processes, as well as product traceability on the shop floor, providing information and insight into how you can reduce your defects and increase yields.
Pluritec: Growth Depends on Developing Next-gen Products
05/15/2025 | Marcy LaRont, PCB007 MagazineMaurizio Bonati, VP of sales at Pluritec, says a new generation of products has driven strong business performance and a significant backlog. However, there’s a concern about the potential negative impact of tariffs. Pluritec is taking proactive measures to minimize these effects by focusing on enhancing equipment capabilities, automating processes, and expanding customer support.
Corning Collaborates with Broadcom to Accelerate AI Data Center Processing Capacity
05/14/2025 | BUSINESS WIRECorning Incorporated, a world leader in glass science and optical physics, today announced a collaboration with Broadcom Incorporated, a leading supplier in the semiconductor field, on a co-packaged optics (CPO) infrastructure that will significantly increase processing capacity within data centers.
Breaking Down Barriers: The Connectivity of Machines in SMT Production Lines
05/14/2025 | Bill Cardoso, Creative ElectronAs the world increasingly moves toward erecting trade barriers, we find ourselves in a paradox. Across the globe, the rise in tariffs and protectionist policies is creating a more fragmented global economy, with nations seeking to insulate themselves from external economic pressures. However, within the confines of the SMT production line, the trend is moving in precisely the opposite direction—toward greater connectivity, integration, and collaboration. Rather than isolating one machine from another, SMT production lines are increasingly interconnected, with data being shared across various stages of the process to improve quality, efficiency, and defect detection.
indie Semiconductor Reports Q1 2025 Results
05/13/2025 | BUSINESS WIREindie Semiconductor, Inc., an automotive solutions innovator, today announced first quarter results for the period ended March 31, 2025. Q1 revenue was up 3.3 percent year-over-year to $54.1 million with Non-GAAP gross margin of 49.5 percent. On a GAAP basis, first quarter 2025 operating loss was $38.9 million compared to $49.6 million a year ago.