-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueInner Layer Precision & Yields
In this issue, we examine the critical nature of building precisions into your inner layers and assessing their pass/fail status as early as possible. Whether it’s using automation to cut down on handling issues, identifying defects earlier, or replacing an old line...
Engineering Economics
The real cost to manufacture a PCB encompasses everything that goes into making the product: the materials and other value-added supplies, machine and personnel costs, and most importantly, your quality. A hard look at real costs seems wholly appropriate.
Alternate Metallization Processes
Traditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
OSI Systems Reports Fiscal Q4 2024 and Full Year Financial Results
August 22, 2024 | BUSINESS WIREEstimated reading time: 4 minutes
OSI Systems, Inc. announced its financial results for the fourth quarter and fiscal year ended June 30, 2024.
Deepak Chopra, OSI Systems’ Chairman and Chief Executive Officer, stated, “We are pleased to report strong fourth quarter financial results as outstanding performance in the Security division led to record revenues and record adjusted earnings per share. Fiscal 2024 was a great success for the Company. With a backlog near all-time highs and visibility into a robust pipeline of opportunities, we believe we are well positioned for a strong fiscal 2025.”
For Q4 FY24, the Company reported revenues of $480.9 million, a 17% increase over the $411.9 million reported for the same quarter of the prior year. Net income for Q4 FY24 was $44.7 million, or $2.55 per diluted share, compared to net income of $42.4 million, or $2.46 per diluted share, for the same quarter of the prior year. Non-GAAP net income for Q4 FY24 was $49.7 million, or $2.84 per diluted share, compared to non-GAAP net income for the same quarter of the prior year of $45.8 million, or $2.66 per diluted share.
For the fiscal year ended June 30, 2024, revenues were $1.54 billion, a 20% increase over the $1.28 billion reported for the prior fiscal year. Net income for the fiscal year ended June 30, 2024 was $128.2 million, or $7.38 per diluted share, compared to $91.8 million, or $5.34 per diluted share, for the prior fiscal year. Non-GAAP net income for the fiscal year ended June 30, 2024 was $141.2 million, or $8.13 per diluted share, compared to non-GAAP net income of $106.7 million, or $6.21 per diluted share, for the prior year.
As of June 30, 2024, the Company's backlog was approximately $1.7 billion. Capital expenditures were $8.5 million and depreciation and amortization was $11.7 million for Q4 FY24.
Chopra commented, “The Security division’s fourth quarter and year end results highlight our momentum with robust demand for our product and service offerings as well as our superior competitive position in many markets in which we operate, including in international markets representing substantial growth opportunities. Security division revenues in the fourth quarter of fiscal 2024 increased 27% year-over-year, leading to significant growth in adjusted operating income. Bookings were again solid and, importantly, even with a considerable conversion of backlog to revenue during the fourth quarter, our quarter-end backlog remains near all-time highs. This further bolsters our confidence for continued strong Security division performance.”
Chopra continued, “As expected and consistent with our guidance from last quarter, our Optoelectronics and Manufacturing division bounced back to report record fourth quarter revenues. I am proud of the Optoelectronics and Manufacturing team’s focus on continuous improvement. This division is poised for solid performance in fiscal 2025 with revenue growth expectations weighted to the second half.”
Chopra also said, “We concluded fiscal 2024 with the strongest quarter of the fiscal year for the Healthcare division. Although the hospital spending environment continues to pose challenges for the patient monitoring sector, we anticipate a stronger fiscal 2025 as compared to fiscal 2024. We are focused on new product development, principally in our patient monitoring portfolio, which we believe will unlock new avenues of growth.”
Subsequent to fiscal year end, in July 2024 the Company issued $350 million of convertible senior notes at an interest rate of 2.25% due in fiscal 2030, the net proceeds of which were partially used to reduce the outstanding balance under the Company’s revolving credit facility.
Alan Edrick, Executive Vice President and Chief Financial Officer, stated, “We were pleased to successfully complete our convertible notes financing at attractive pricing. We expect this financing to facilitate continued growth while simultaneously reducing our weighted average cost of borrowing. This transaction reflects the strength of our business and is expected to result in significant interest savings.”
Fiscal Year 2025 Outlook
For fiscal year 2025, the Company anticipates revenues in the range of $1.620 billion to $1.650 billion and non-GAAP adjusted earnings per diluted share in the range of $8.80 to $9.15. Actual revenues and adjusted diluted earnings per share could vary from this guidance due to factors discussed under “Forward-Looking Statements” or other factors.
The Company’s fiscal 2025 adjusted diluted earnings per share guidance is provided on a non-GAAP basis only. The Company does not provide a reconciliation of guidance for non-GAAP adjusted diluted EPS to GAAP diluted EPS (the most directly comparable GAAP measure) on a forward-looking basis because the Company is unable to provide a meaningful or accurate compilation of reconciling items and certain information is not available. This is due to the inherent difficulty and complexity in accurately forecasting the timing and amounts of various items included in the calculation of GAAP diluted EPS but excluded in the calculation of non-GAAP adjusted diluted EPS, such as acquisition costs and other non-recurring items that have not yet occurred, are out of the Company’s control or cannot otherwise reasonably be predicted. For the same reasons, the Company is unable to address the significance of unavailable information which may be material and therefore could result in GAAP diluted EPS, the most directly comparable GAAP financial measure, being materially different from projected non-GAAP adjusted diluted EPS.
Suggested Items
Kimball Electronics Thailand Namlee School
12/26/2024 | Kimball ElectronicsKimball Electronics Thailand (KETL) has continued its commitment to supporting education and community development in Thailand.
Diverging Electrification Goals between Honda and Nissan; Accelerated Resource Integration will be the Top Priority Post-Merger
12/25/2024 | TrendForceHonda and Nissan—two of Japan’s largest automakers—announced on December 23rd, 2024, that they have entered into merger negotiations, with plans to finalize an agreement by June 2025. Mitsubishi Motors is also expected to join the partnership.
Texas Instruments Announces Award Agreement for CHIPS and Science Act Funding
12/25/2024 | Texas InstrumentsTexas Instruments (TI) (Nasdaq: TXN) and the U.S. Department of Commerce today announced an award agreement of up to $1.6 billion in direct funding through the U.S. CHIPS and Science Act, following the preliminary memorandum of terms announced in August 2024.
Market-Comms, VNU Asia Pacific Unite to Drive THECA 2025 as a PCB Industry Game-Changer
12/23/2024 | EINPresswire.comThailand Electronics Circuit Asia (THECA) 2025 has officially announced its event partnership with Market-Comms Co., Ltd. (MCOMMS), No.1 local public relations firm, and VNU Asia Pacific, the designated show manager for the event.
IPC Announces New Training Course: PCB Design for Military & Aerospace Applications
12/23/2024 | IPCIPC announced the launch of a new training course: PCB Design for Military & Aerospace Applications.