-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueThe Rise of Data
Analytics is a given in this industry, but the threshold is changing. If you think you're too small to invest in analytics, you may need to reconsider. So how do you do analytics better? What are the new tools, and how do you get started?
Counterfeit Concerns
The distribution of counterfeit parts has become much more sophisticated in the past decade, and there's no reason to believe that trend is going to be stopping any time soon. What might crop up in the near future?
Solder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
Estimated reading time: 2 minutes
The Shaughnessy Report: A Handy Look at Rules of Thumb
Rules of thumb are everywhere. I took an auto mechanics class when I was 16, and I still remember the instructor telling us, “Remember, the cause of the problem is usually the simplest thing.” That holds true for much of life, actually.
There are hundreds of rules of thumb for PCB design. They’re built on design formulas, fabricators’ limitations, and tribal knowledge. Unfortunately, some longtime rules of thumb should be avoided at all costs.
We wanted to get to the bottom of rules of thumb, so we surveyed readers. Here are a few of the interesting answers that readers provided, edited slightly for clarity.
What rules of thumb do you utilize regularly, and why?
- Avoid 90° and acute angle routing to prevent acid traps
- Higher than 1GHz = high speed; lower = I don't care
- 2x dielectric (approximation) thickness for 50-ohm RF traces
When is it time to “do the science” instead of using a rule of thumb?
- For fast edge rates and high-reliability products
- When you need to simulate the BER of DDR4 memory or, even better, DDR5 memory, serial link buses
- If traces are very high-speed, currents are large, and interfaces are mission-critical, especially when simulations or other evaluation aren't being done. If the rule of thumb seems borderline, it's worth a closer look. Trust your gut.
Speaking of which, I’ve heard “Trust your gut” quite a few times while working on this issue. That’s a good rule of thumb in itself, because some rules of thumb have outlived their usefulness.
In the November 2024 issue of Design007 Magazine, we delve into rules of thumb—which ones work, which ones should be avoided, and when it’s time to “do the science.” We have a feature interview with IPC’s Kris Moyer and columnist Kelly Dack, and another interview with Chris Young of Moog Space and Defense Group. We also have articles by Scott Miller of Freedom CAD and Patrick Davis of Cadence Design Systems. And Barry Olney, Joe Fjelstad, and John Watson contribute feature columns.
We also have an article by ASC Sunstone CEO Anaya Vardya and an interview with Jon Smith, a former student in John Watson’s Palomar College PCB design class.
It’s show time, and I’ll be heading to PCB Carolina in a few weeks. Hope to see you there.
This column originally appeared in the November 2024 issue of Design007 Magazine.
More Columns from The Shaughnessy Report
The Shaughnessy Report: Are You Partial to Partial HDI?The Shaughnessy Report: Silicon to Systems—The Walls Are Coming Down
The Shaughnessy Report: Watch Out for Cost Adders
The Shaughnessy Report: Mechatronics—Designers Need to Know It All
The Shaughnessy Report: All Together Now—The Value of Collaboration
The Shaughnessy Report: Unlock Your High-speed Material Constraints
The Shaughnessy Report: Design Takes Center Stage at IPC APEX EXPO
The Shaughnessy Report: The Myriad Opportunities—and Challenges