The Marketing Minute: Cracking the Code of Technical Marketing
Trouble in Your Tank: Implementing Direct Metallization in Advanced Substrate Packaging
Advanced Packaging and Stackup Design: December 2024—Design007 Magazine
December 9, 2024 | I-Connect007 Editorial TeamEstimated reading time: Less than a minute
Advanced Packaging and Stackup Design
As advanced packaging moves further into the mainstream of PCB design, more PCB designers and design engineers are realizing that this isn’t a plug-and-play technology. As we see in this issue, advanced packaging can have an impact on the entire design—the stackup in particular.
For the December 2024 issue of Design007 Magazine, we asked our expert contributors to discuss the impact of advanced packaging on stackup design—from SI and DFM challenges through the variety of material tradeoffs that designers must contend with in the arena of HDI and UHDI. And with a little research, planning, and collaboration with the fabricator, any seasoned PCB designer can utilize advanced packaging.
Share on:
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
Marcy’s Musings: Advancing the Advanced Materials Discussion
09/17/2025 | Marcy LaRont -- Column: Marcy's MusingsAs the industry’s most trusted global source of original content about the electronics supply chain, we continually ask you about your concerns, what you care about, and what you most want to learn about. Your responses are insightful and valuable. Thank you for caring enough to provide useful feedback and engage in dialogue.
Staying on Top of Signal Integrity Challenges
09/16/2025 | Andy Shaughnessy, Design007 MagazineOver the years, Kris Moyer has taught a variety of advanced PCB design classes, both online IPC courses and in-person classes at California State University-Sacramento, where he earned his degrees in electrical engineering. Much of his advanced curriculum focuses on signal integrity, so we asked Kris to discuss the trends he’s seeing in signal integrity today, the SI challenges facing PCB designers, and his go-to techniques for controlling or completely eliminating SI problems.
I-Connect007 Launches Advanced Electronics Packaging Digest
09/15/2025 | I-Connect007I-Connect007 is pleased to announce the launch of Advanced Electronics Packaging Digest (AEPD), a new monthly digital newsletter dedicated to one of the most critical and rapidly evolving areas of electronics manufacturing: advanced packaging at the interconnect level.
U.S. CHIPS Act Funding Detailed on SIA Website
09/12/2025 | Nolan Johnson, I-Connect007The U.S. CHIPS Act has moved well into the implementation stage in 2025. But where has that money gone? The Semiconductor Industry Association has been tracking these projects and provides details on its website. It was updated May. Among the five key programs being managed under CHIPS, two stand out as influencing advanced electronic packaging: the National Advanced Packaging Manufacturing Program (NAPMP), and the CHIPS Manufacturing USA Institute (MFG USA).
Advanced Packaging: Preparation is Now
09/15/2025 | Nolan Johnson, I-Connect007In this interview, Matt Kelly, CTO for the Global Electronics Association, and Devan Iyer, chief strategist of advanced packaging, define advanced electronics packaging and the critical nature of getting it right in the electronics manufacturing field. They share details from their white paper, “Advanced Packaging to Board Level Integration—Needs and Challenges,” and provide insight into how next-generation packaging will change the design, fabrication, and assembly of printed circuit boards, including the implications for final system assembly.