It’s Only Common Sense: Stop Pitching, Start Listening
Trouble in Your Tank: Causes of Plating Voids, Pre-electroless Copper
Dan’s Biz Bookshelf: ‘Growth Hacker Marketing’
Successful Pre-acceptance of TSK Schill GmbH Production Line for Moulded Etched Parts
December 16, 2024 | TSK Schill GmbHEstimated reading time: 1 minute
The specialist for horizontal wet systems for the production of printed circuit boards, chemical milling and moulded etched parts, TSK Schill GmbH from Gäufelden-Nebringen, is installing new production systems at one of the leading manufacturers of precision metal parts.
Metaq GmbH, based in Wuppertal, is one of the new customers who rely on the competence and experience of TSK Schill for the comprehensive renewal of their etching technology systems.
In November 2024, a system was installed on schedule that will cover three of the four main production steps. From the preparation of the materials in thicknesses of 0.1 to 1 millimeter to the actual etching process and the post-processing of the parts, the individual modules of the system offer innovative technology and modern production processes.
The client's requirements were clearly defined: very good energy efficiency, a high degree of digitalization and automation, and continuous monitoring of the production process for optimal control of the manufacturing parameters. The TSK Schill team
GmbH has accepted this challenge and will continue to intensively accompany the process of commissioning the plant even after the successful preliminary acceptance.
Thomas Schill, Managing Director of TSK Schill GmbH, thanks Metaq GmbH for the trust it has placed in us and assures his customer Claudia Schemann, Managing Director of Metaq GmbH, of a continued constructive and cooperative cooperation.
Etching technology is a photochemical process for the dimensionally accurate production of metal moulded parts. The precision parts are manufactured with an accuracy of hundredths of a millimeter - without mechanical or thermal stress on the material. The result is burr- and stress-free parts that can be produced quickly and economically thanks to digital tools.
Share on:
Suggested Items
Saab Grows in Gothenburg and Establishes New Facility
05/12/2025 | SaabAs a result of the increased demand for radar and sensor systems and a high recruitment rate, Saab is expanding its operations in the Gothenburg region in Sweden with another facility in Mölnlycke, Härryda municipality. This enables Saab to continue to grow and increase its delivery capacity in the region
GPV Posts Balanced Q1 2025; Continued Focus on Adapting to New Market Conditions
05/12/2025 | GPVDanish-based GPV, the second-largest European-headquartered EMS company, has had a satisfactory and balanced start to 2025. In the first quarter, the Group reported sales of DKK 2.2 billion and earnings (EBITDA) of DKK 143 million.
Primech AI Plans Production of 300 HYTRON Robots through its China Manufacturing Expansion
05/09/2025 | Globe NewswirePrimech AI Pte. Ltd., a subsidiary of Primech Holdings Limited announced a significant expansion of its manufacturing capabilities through a strategic manufacturing partnership in Guangdong Province, China.
Ultrahuman Expands its American Factory’s Manufacturing Capacity
05/09/2025 | GlobeNewswireUltrahuman, a pioneer in health optimization technology, has announced that it’s ramping up its capacity of the Ring AIR. Ultrahuman’s manufacturing facility (UltraFactory) in partnership with SVtronics, a US-based electronics manufacturing business, has been operational in Plano, Texas, since November 2024.
Kitron Signs €7 Million Annual Manufacturing Agreement for Advanced Sensor Technology
05/09/2025 | KitronKitron has entered into a multi-year agreement with a U.S.-based customer to manufacture advanced sensor-based products intended for the European market.