-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueAdvanced Packaging and Stackup Design
This month, our expert contributors discuss the impact of advanced packaging on stackup design—from SI and DFM challenges through the variety of material tradeoffs that designers must contend with in HDI and UHDI.
Rules of Thumb
This month, we delve into rules of thumb—which ones work, which ones should be avoided. Rules of thumb are everywhere, but there may be hundreds of rules of thumb for PCB design. How do we separate the wheat from the chaff, so to speak?
Partial HDI
Our expert contributors provide a complete, detailed view of partial HDI this month. Most experienced PCB designers can start using this approach right away, but you need to know these tips, tricks and techniques first.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
Aspocomp’s Shareholders’ Nomination Board’s proposals to the Annual General Meeting 2025
December 19, 2024 | AspocompEstimated reading time: 2 minutes
The Shareholders’ Nomination Board of Aspocomp Group Plc submits the following proposals to the Annual General Meeting, planned to be held on April 29, 2025. The proposals will also be included in the Notice to the Annual General Meeting 2025 to be published at the later date.
Number of Board members
The Shareholder’s Nomination Board proposes to the Annual General Meeting that four members be elected to the Board of Directors.
Members of the Board of Directors
The Shareholder’s Nomination Board proposes to the Annual General Meeting that the current members of the Board of Directors Mr. Anssi Korhonen and Mr. Ville Vuori be re-elected as members to the Board of Directors and Ms. Jenni Enroth and Ms. Kaisa Kokkonen be elected as new members of the Board of Directors. In accordance with the Articles of Association of the company, the term of office of the members of the Board of Directors ends at the closing of the next Annual General Meeting following the election.
The said director nominees have given their consent to the election. The current members of the Board of Directors Päivi Marttila, Kaarina Muurinen and Jukka Huuskonen, have informed that they are not available for re-election.
Presentations of the proposed new members of the Board of Directors Jenni Enroth and Kaisa Kokkonen are attached to this stock exchange release. The proposed current members of the Board of Directors are presented on Aspocomp’s website.
The Nomination Board has assessed the director nominees’ independence against the independence criteria of the Finnish Corporate Governance Code. According to the evaluation carried out by the Nomination Board, all director nominees are independent of the company’s significant shareholders. The Nomination Board has also assessed that all nominees are independent of the company.
Board remuneration
Shareholder’s Nomination Board proposes to the Annual General Meeting that the amount of remuneration payable to the Board of Directors remain the same as in the ending term and that Board Members be thus compensated as follows: EUR 30,000 for the chairman of the Board of Directors, EUR 20,000 for the vice chairman, and EUR 15,000 for each of the other members in remuneration for their term of office. The Nomination Board further proposes that EUR 1,000 be paid as remuneration per meeting to the chairman and that the other members be paid EUR 500 per meeting of the Board and its committees. The Nomination Board also proposes that the members of the Board of Directors be reimbursed for reasonable travel costs. The Nomination Board further proposes that earning-related pension insurance contributions are paid voluntarily for the paid remuneration.
Composition of Shareholder’s Nomination Board
Aspocomp’s Shareholders’ Nomination Board consists of three members who represent the company’s three largest shareholders. In addition, the Chairman of the company’s Board of Directors shall serve as an expert member of the Nomination Board unless he or she is appointed as an ordinary member of the Board. The three largest shareholders are determined annually based on the ownership information registered with the company’s shareholders’ register on the first business day of September.
The Shareholder’s Nomination Board, which prepared the proposals for the Annual General Meeting 2025, includes the following members: Ms. Päivi Marttila, appointed by Etola Group and Erkki Etola, Mr. Kyösti Kakkonen, appointed by Joensuun Kauppa ja Kone Oy and Mr. Mikko Montonen, Aspocomp’s third largest shareholder.
Päivi Marttila did not participate in the decision-making concerning the remuneration of the Board members.
Suggested Items
CACI Chairman, Michael A. Daniels, Receives Prestigious Lifetime Achievement Recognition from NACD
12/20/2024 | CACI International Inc.CACI International Inc announced that CACI Chairman of the Board of Directors Michael (Mike) A. Daniels was presented with the prestigious 2024 National Association of Corporate Directors (NACD) Directorship 100™ B. Kenneth West Lifetime Achievement Award at its annual gala in New York.
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.
Cadence Appoints Moshe Gavrielov to Board of Directors
12/13/2024 | Cadence Design SystemsCadence Design Systems, Inc. announced the appointment of Moshe Gavrielov to its board of directors, effective January 1, 2025. Mr. Gavrielov currently serves as a member of the board of NXP Semiconductors N.V. and Taiwan Semiconductor Manufacturing Company Ltd., as chair of the board of Foretellix and SiMa.ai, and has previously held executive roles at several global technology companies.
Burkle's Marco Schaible Joins VDMA Photovoltaic Equipment Division’s Executive Board
12/13/2024 | Burkle AmericaThe Photovoltaic Production Equipment Department of the VDMA held regular elections at its board meeting on December 5 and confirmed the top management. Prof. Dr. Peter Fath, RCT Solutions GmbH, was re-elected as Chairman of the Board and Dr. Stefan Rinck, Singulus Technologies AG, was re-elected as Deputy Chairman.Burkle America is proud to announce that Marco Schaible, our Vice President of PV and Glass Solutions, has been confirmed as a member of the new Executive Board for the VDMA’s Photovoltaic Production Equipment Division. This appointment reflects Marco’s exceptional expertise and commitment to advancing innovation and competitiveness in the German-European solar machinery industry.
Taiwanese PCB Industry Witnessed Steady Growth of 9.6% in Q3 2024
12/12/2024 | TPCAThe global output value of Taiwanese circuit board enterprises demonstrated steady growth in the third quarter of 2024, reaching NT$227.1 billion, a year-over-year increase of 9.6%.