Nolan’s Notes: Our Spotlight on Europe
One World, One Industry: Attending APEX EXPO 2026 Critical for Electronics Manufacturing Leaders
Standard of Excellence: Building the Board of the Future—Materials, Methods, and Mindset
TRUMPF, SCHMID Group Enable Cost-effective High-speed Chips
January 24, 2025 | SCHMID GroupEstimated reading time: 2 minutes
TRUMPF and the SCHMID Group are developing an innovative manufacturing process for the latest microchip generation for the global chip industry. This will enable manufacturers to increase the performance of high- end electronic components for smartphones, smart watches and AI applications. In the process known as advanced packaging, manufacturers combine individual chips on silicon components known as interposers. With the process from TRUMPF and SCHMID, these interposers can be made of glass in the future. “Advanced packaging with glass is a crucial future technology for the semiconductor industry. Glass is significantly cheaper than silicon. This will enable manufacturers to reduce production costs and make high-performance end devices much more affordable for customers,” says Christian Weddeling, Business Development Manager at TRUMPF, who is responsible for semiconductors. TRUMPF and SCHMID are developing a combined laser-etching process for advanced packaging with glass. The two companies use a special approach to wet chemistry that shortens process times by a factor of ten. “For this to work well, the laser and wet chemistry must be very well coordinated,” says Weddeling.
Close partnership between TRUMPF and SCHMID Group
The manufacturing process requires extreme care and precision. This is because the glass used is only between 100 micrometers and 1 millimeter thin. For comparison: 100 micrometers is about the thickness of a sheet of paper, 1 millimeter is about the thickness of a credit card. To create connections on the interposer, manufacturers have to drill holes through the glass, so-called through-glass vias (TGV). Manufacturers often have to create millions of holes in a panel to make the desired connections. “It is the combination of TRUMPF's laser technology and the SCHMID Group's expertise in etching processes for microchip production that enables efficient production,” says Christian Buchner, responsible for the photovoltaic division at SCHMID Group. An ultrashort pulse laser from TRUMPF selectively changes the structure of the glass, which is then treated with an etching solution. The desired holes are created at the specified locations and then filled with copper to form
the conductor tracks. “The laser and etching processes must be perfectly coordinated to create precise holes. Only through close cooperation between the two companies can we achieve the extreme levels of accuracy that are standard in the industry,” says Buchner.
Important future market for technology companies
According to the Boston Consulting Group, the market for advanced microchip packaging is expected to grow to more than 96 billion dollars by 2030. For the high-tech company TRUMPF and the SCHMID Group, a renowned partner of the chip industry, advanced packaging with the help of glass could also develop into an important future market.
Currently, applications in consumer electronics such as smartphones dominate the advanced packaging sector. In the future, applications in the field of artificial intelligence are likely to be the growth drivers.
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
LPKF Develops Glass Components for Quantum Computers in Funded QVLS-iLabs Future Cluster
02/27/2026 | LPKFLPKF Laser & Electronics is participating as a technology partner in the QVLS-iLabs future cluster, which has secured an additional €15 million in funding from the German Federal Ministry for Research, Technology and Space Travel (BMFTR) for the next three years. T
AGY, JPS Composite Materials Partner to Produce North America’s First Low CTE Glass Fiber Fabric for Advanced IC Substrates
02/26/2026 | BUSINESS WIREThis collaboration combines AGY’s proprietary L-HDI™ ultra-low CTE glass fiber, produced at its Aiken, South Carolina manufacturing facility, with JPS Composite Materials’ advanced weaving and fabric production capabilities at its Statesville, North Carolina facility.
EIPC Winter Conference Review: From Innovation to Qualification
02/13/2026 | Pete Starkey, I-Connect007Refreshed after a reasonably early night and a restful sleep, delegates dutifully re-assembled for Day 2 and Session 4 of EIPC’s Winter Conference in Aix-en-Provence on Feb. 4, “Driving the Future: Innovation, Energy, and Sustainability in PCB Technology.” The theme of this session, moderated by EIPC board member Martyn Gaudion, CEO of Polar Instruments, was “From innovation to qualification: New materials, processes and applications.” His first speaker was Steve Driver, whose presentation was entitled “Ideation > Certification > Qualification > Integration” and subtitled “The journey of a disruptor.”
Designers Notebook: Heterogeneous Interposer Design Challenge, Part 2
02/16/2026 | Vern Solberg -- Column: Designer's NotebookAs the need grows for higher processing speed and the expanded functionality required for newer generations of central processing units (CPUs), the necessity for higher-density interconnect solutions is paramount. The current trend toward furnishing a single, monolithic system-level semiconductor package has become a serious yield issue in fabrication. For example, with all of the peripheral supporting functions on a single die platform, wafer fabrication yields are often below target and, although the CPU portion of a monolithic semiconductor may be perfect, if one or more of the supporting functions on the same die fails, the entire processor unit must be discarded.
The Chemical Connection: Changes and Challenges Ahead in PCB Fabrication
02/09/2026 | Don Ball -- Column: The Chemical ConnectionWhat are the most influential changes in PCB fabrication in the next five years? Throughout my many years in the PCB industry, I have witnessed numerous predictions about the industry's future, as well as the introduction of alternative processes that promised to revolutionize the industry. Most of the more radical predictions have fallen by the wayside, and those alternative processes have failed to produce the predicted results, becoming niche processes at best.