SFL Missions Awarded Canadian Space Agency Contract for HAWC Satellite Mission Conceptual Design Study
February 7, 2025 | BUSINESS WIREEstimated reading time: 1 minute
SFL Missions Inc. has been awarded a competitive bid contract by the Canadian Space Agency (CSA) to conduct a conceptual design study of the planned High-Altitude Aerosols, Water vapour, and Clouds (HAWC) satellite mission. HAWC is Canada’s contribution to NASA’s Atmosphere Observing System (AOS) mission slated for launch in 2031.
“The HAWC mission will collect atmospheric data that will support extreme weather prediction, climate modeling, and air quality forecasting,” said Michael Henderson, SFL Missions Inc.’s Guidance, Navigation and Control Specialist.
Under the Phase 0 contract, SFL Missions will study the design requirements of the planned HAWC satellite (HAWCsat) and the Aerosol Limb Imager (ALI) instrument that will fly onboard. ALI will measure aerosols, which are tiny solid and liquid particles suspended in the atmosphere. Emanating from forest fires and volcanoes, as well as power plants and industrial processes, aerosols impact weather, climate, and air quality.
ALI will be complemented by the Spatial Heterodyne Observations of Water (SHOW) instrument also carried aboard HAWCsat. SHOW will measure water vapour in the upper atmosphere, a key component of cloud formation which drives heating and cooling of Earth.
ALI and SHOW will make measurements in coordination with a third Canadian instrument, called Thin Ice Clouds and Far InfraRed Emissions (TICFIRE), which is flying on the NASA AOS satellite. HAWCsat will fly in formation leading the AOS spacecraft by 310 seconds.
SFL Missions is uniquely qualified to study the design of this mission due to the importance of formation flying of HAWCsat with the AOS spacecraft. SFL Missions has expertise in precise attitude control, accurate sensor pointing, and autonomous formation flying technologies that have been developed and refined for low-mass smaller satellites.
“Success of the mission depends on the HAWC spacecraft flying in a precise orbit relative to the AOS satellite, so that both capture measurements from the same portion of the atmosphere at the same time, but from different angles,” said Henderson.
The study phase, or Phase 0, of the CSA HAWC mission design will be completed by November of this year.
Suggested Items
Northrop Grumman’s Minotaur IV Rocket Successfully Launches National Security Payload for National Reconnaissance Office
04/21/2025 | Northrop GrummanNorthrop Grumman Corporation successfully launched the NROL-174 mission on a Minotaur IV rocket for the National Reconnaissance Office from Space Launch Complex 8 at Vandenberg Space Force Base in California. Minotaur IV is part of Northrop Grumman’s Minotaur family of vehicles that combines U.S. government-supplied rocket motors with the company’s proven commercial launch capabilities.
Real Time with... IPC APEX EXPO 2025: Emerging Trends in Design and Technology
04/16/2025 | Real Time with...IPC APEX EXPOAndy Shaughnessy speaks with IPC design instructor Kris Moyer to discuss emerging design trends. They cover UHDI technology, 3D printing, and optical data transmission, emphasizing the importance of a skilled workforce. The role of AI in design is highlighted, along with the need for understanding physics and mechanics as designs become more complex. The conversation concludes with a focus on enhancing math skills for better signal integrity.
Designers Notebook: Layer Stackup Planning for RF Circuit Boards
04/17/2025 | Vern Solberg -- Column: Designer's NotebookWhen designing multiple layer circuits requiring impedance control, the circuit board designer will work closely with an engineering specialist cognizant of RF printed circuit board design and layout, including mixed-signal applications.
Apogee Semiconductor Teams with Arrow Electronics to Expand Distribution of Space-Grade Technologies
04/14/2025 | Apogee SemiconductorApogee Semiconductor, a leading provider of advanced technologies for space and extreme environments, announced its collaboration with Arrow Electronics, a global distributor of electronic components and services.
HT Pho-Tronics Appoints Ankit B. Goti as New General Manager to Drive Strategic Growth
04/14/2025 | HT Pho-TronicsHT Pho-Tronics, a leading provider of high-reliability printed circuit boards (PCBs), proudly announces the appointment of Ankit B. Goti as the company’s new General Manager, effective immediately.