Designers Notebook: Addressing Future Challenges for Designers
Connect the Dots: Designing for Reality—Surface Finish
Fresh PCB Concepts: Tariffs and the Importance of a Diverse Supply Chain
Finding and Training the Designers of Tomorrow: Design007 Magazine, February 2025
February 10, 2025 | I-Connect007 Editorial TeamEstimated reading time: Less than a minute
Finding and Training the Designers of Tomorrow
It’s no big secret: There’s a shortage of PCB designers and design engineers, and we don’t have enough of a pipeline to fill these seats. To top it off, the last batch of designers from the Baby Boomer generation is approaching retirement.
For the February 2025 issue of Design007 Magazine, we asked our expert contributors to address these questions: Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What disciplines will the designers of the future need to understand and master to deal with tomorrow’s technology?
Share on:
Suggested Items
Flexible Thinking: Mind-tapping into January
02/05/2025 | Joe Fjelstad -- Column: Flexible ThinkingIt’s January again, and our beleaguered planet has completed yet another trip around the sun. The Romans named January in honor of their god Janus, who is usually depicted as a bearded old man with two faces—one looking back to the past and the other looking forward to the future. People venerated Janus as the god of beginnings and endings, transitions, and the passage of time. With that in mind, I’ll look 10 years into the future—hopefully with a bit of inspiration from Janus—and prognosticate what might be happening in electronic design.
The PCB Designer of the Future: Blending Innovation, Technology, and Sustainability
02/03/2025 | Stephen V. Chavez, Siemens EDAThe global demand for electronics is skyrocketing, fueled by rapid technological advancements and groundbreaking innovations across many industries, including automotive, telecommunications, healthcare, and consumer electronics. PCB design is the foundation of electronic hardware and lies at the heart of this evolution.
SMTA UHDI Symposium 2025, Part 1: Challenges and Solutions
01/28/2025 | Marcy LaRont, I-Connect007SMTA hosted its second annual Ultra High Density Interconnect Symposium, a conference on cutting-edge PCB technology, on Jan. 23, 2025, at the Peoria Sports Complex in Arizona. A highly pro-business state with a special affection for the tech sector, Arizona is home to the biggest Intel semiconductor fab in the United States and the new TSMC chip fab. With an intimate group of approximately 50 attendees, the SMTA event offered a great forum for learning, interactive discussion, and networking.
EDA Tools and the Designer of the Future
01/28/2025 | Andy Shaughnessy, Design007 MagazineWe’re seeing new, young technologists moving into the PCB design and design engineering segment, and it’s just in time; many veteran designers are headed to retirement. At the same time, there have been various recent advances in EDA tools. What will the PCB designer’s job—and the designer’s software tools—look like in the next five years? Bob Potock, vice president of marketing for Zuken USA, weighs in on the PCB designers of tomorrow, and the EDA tools that will take them into an evermore complex future.
I-Connect007 Releases The Printed Circuit Designer’s Guide to... More Secrets of High-Speed PCBs by Martyn Gaudion
01/29/2025 | I-Connect007I-Connect007 is proud to announce the release of The Printed Circuit Designer’s Guide to... More Secrets of High-Speed PCBs, authored by Martyn Gaudion of Polar Instruments. This invaluable resource offers essential insights for anyone involved in the design, procurement, or fabrication of high-speed impedance or insertion loss-controlled PCBs, as well as complex HDI PCBs requiring precise documentation.
Copyright © 2025 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in