-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueCreating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
Designing Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
Learning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
NEXT Semiconductor Technologies Collaborates with BAE Systems to Develop Next Generation Space-Qualified Chips
April 28, 2025 | PRNewswireEstimated reading time: 1 minute

NEXT Semiconductor Technologies is collaborating with BAE Systems to accelerate the insertion of its latest ultra-wideband antenna processor units (APUs) into high-performing radiation-hardened electronic subsystems to support future space missions. NEXT's APUs combine agile signal acquisition and generation with on-board high-reliability, reconfigurable digital processing that offer unprecedented quantity, quality and efficiency of information processing for next generation satellite sensors and transmitters. This effort will enable efficient and resilient wideband RF (radio-frequency) signal processing capabilities not yet available to the space market.
NEXT's latest APU, the NX450, is the world's first 200 GS/s (200 billion samples per second) antenna processor with 100-GHz of instantaneous RF bandwidth split across four independent receive and transmit channels respectively. The NX450 simplifies sensor design by pushing signal digitization and processing closer to the edge – redefining electronic warfare capabilities while reducing sensor SWaP (size, weight, and power). The NX450 is manufactured in an onshore GlobalFoundries 12LP (12 nanometer) FinFET process, features embedded application processor redundancy and has been radiation tested for space qualification.
As satellite networking proliferates, the demand for both greater data payloads and on-orbit processing is driving the advancement of System-on-Chip (SoC) solutions such as APUs that define the capabilities and performance of satellite antenna systems. The NX450 is the first device of its kind to address the emerging demands for secure wide bandwidth satellite communication (SATCOM).
"NEXT is firmly entrenched in the development of high-reliability, software-defined SoC solutions for next generation satellite payloads. We are eager to collaborate with BAE Systems to address future space missions with our unique SoC capabilities," said Mike Kappes, President and Chief Strategy Officer at NEXT Semiconductor.
BAE Systems will provide support of the NX450 APU for use in proliferated low-Earth orbit missions. The company may also work with NEXT to incorporate its own application specific integrated circuit technology and expertise for use in future SoC products. These next-generation, radiation-hardened solutions are the key enabler of wide bandwidth capabilities in demanding space environments.
"By leveraging our decades of space electronics experience, we can apply our radiation-hardened techniques to a commercial off-the-shelf product to deliver a new capability addressing our space customers' needs," said Jim LaRosa, Space Systems program director at BAE Systems. "Our collaboration with NEXT allows for the development of future solutions with dramatically increased mission and environmental performance."
Suggested Items
Geospace Unveils New Brand Identity Reflecting the Company’s Move into Diverse Markets
05/20/2025 | BUSINESS WIREGeospace Technologies Corporation announces a new brand identity, reflecting the company's transformation of its leadership and culture along with a redefined strategy focused on applied intelligent technology.
Foxconn, Thales Group Announce Strategic Partnership in Semiconductor and Space
05/20/2025 | FoxconnHon Hai Technology Group (Foxconn) on Monday announced a strategic partnership with Thales Group of France in the fields of semiconductors and space, a move that deepens the industrial expertise and broadens the European footprint of the world’s largest electronics manufacturing service provider.
Federal Electronics Adds AS9100 Certification to Hermosillo, Mexico Facility, Expanding Aerospace & Defense Capabilities
05/20/2025 | Federal ElectronicsFederal Electronics, a leader in providing advanced electronic manufacturing services, has officially added AS9100 certification to its Hermosillo, Mexico facility, further aligning its operations with the quality standards required by the aerospace and defense industries.
Airbus Next-Generation Skynet Satellite Reaches Major Milestone
05/20/2025 | AirbusThe UK’s next-generation military communications satellite—Skynet 6A—has successfully completed the coupling of its communications and service modules. "This significant development in the programme will allow Airbus to complete final baseline testing at our Stevenage site, followed by environmental testing back at NSTF later this year," said Airbus Defence and Space UK Chairman Ben Bridge.
Rheinmetall, ICEYE Sign MoU to Establish Joint Venture
05/14/2025 | RheinmetallRheinmetall and globally leading SAR satellite manufacturer ICEYE are further intensifying their cooperation. The two companies intend to establish a joint venture for satellite production. A memorandum of understanding to this effect was signed on 8 May 2025.