-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Bell to Build X-Plane for Phase 2 of DARPA Speed and Runway Independent Technologies (SPRINT) X-Plane Program
July 9, 2025 | Bell Textron Inc.Estimated reading time: 1 minute

Bell Textron Inc., a Textron Inc. company, has been down-selected for Phase 2 of Defense Advanced Research Projects Agency (DARPA) Speed and Runway Independent Technologies (SPRINT) X-Plane program with the objective to complete design, construction, ground testing and certification of an X-plane demonstrator.
“Bell is honored to have been selected for the next phase of DARPA’s SPRINT program and is excited to demonstrate a brand-new aircraft with the first-ever stop/fold technology,” said Jason Hurst, executive vice president, Engineering. “This is an achievement we’ve been working towards for over 10 years, as we’ve leveraged our nearly 90-year history of X-plane development to bring new technology to our warfighters.”
The goal of the program is to provide these aircraft with the ability to cruise at speeds from 400 to 450 knots at relevant altitudes and hover in austere environments from unprepared surfaces. In Phase 1A and 1B, Bell completed conceptual and preliminary design efforts for the SPRINT X-plane. Phase 2 includes detailed design and build culminating in flight test during Phase 3.
In preparation for X-plane development, Bell has completed significant risk reduction activities including demonstrating folding rotor, integrated propulsion, and flight control technologies at Holloman Air Force Base as well as wind tunnel testing at the National Institute for Aviation Research (NIAR) at Wichita State University. Bell has a rich history of breaking barriers and high-speed vertical lift technology development, pioneering innovative VTOL configurations like the X-14, X-22, XV-3 and XV-15 for NASA, the U.S. Army and U.S. Air Force, and continues to build on the legacy of the Bell X-1.
Suggested Items
Bell Boeing Celebrate U.S. Air Force CV-22 Program of Record
04/29/2025 | BoeingBell Textron Inc., a Textron Inc. company, and Boeing celebrate the upcoming completion of the CV-22 Program of Record (POR) for the U.S. Air Force. Bell and Boeing commemorated the V-22 Osprey production milestone during a ceremony at the Bell Amarillo Assembly Center on April 18.
Bell Announces New Manufacturing Facility for the U.S. Army’s Future Long Range Assault Aircraft
12/18/2024 | BellBell Textron Inc., a Textron Inc. company, announced a facility site selection today to support production of the U.S. Army’s Future Long Range Assault Aircraft (FLRAA). The new 447,000 sq. ft. factory, located in the Denton County region of Fort Worth, Texas, will be dedicated to FLRAA component manufacturing. Bell plans to begin facility modification and equipment installation and achieve facility readiness for Low-Rate Initial Production (LRIP) by 2028.
Bell Announces Site Selection for Future Long Range Assault Aircraft Fuselage Assembly
11/06/2024 | Bell Textron Inc.Bell Textron Inc., a Textron Inc. company, announced the site selection for the Future Long Range Assault Aircraft (FLRAA) fuselage assembly in Wichita, Kansas at an existing facility located at Beech Field on Textron Aviation’s East Campus near the site of Textron Aviation Defense. Bell plans to begin operations at the facility in the next several months.
Bell Awarded Funding for Phase 1B of DARPA Speed and Runway Independent Technologies (SPRINT) X-Plane Program
05/30/2024 | BellBell Textron Inc., a Textron Inc. company, has been down-selected for Phase 1B of Defense Advanced Research Projects Agency (DARPA) Speed and Runway Independent Technologies (SPRINT) X-Plane program.
The Next Chapter for Bell’s H-1 Helicopters Begins
04/01/2024 | Bell Textron Inc.The first Bell AH-1Z set to receive the Structural Improvement Electrical Power Upgrade (SIEPU) modification to be provided by Bell Textron Inc., a Textron Inc company, under a contract with the U.S. Marine Corps, has arrived at Bell’s Amarillo Assembly Center.