Dan’s Biz Bookshelf: ‘The Next RenAIssance: AI and the Expansion of Human Potential’
The Chemical Connection: When the Industry Moves Faster Than the Standards
Driving Innovation: Selecting the Right Laser Source
Proper Plane Design Techniques
February 12, 2026 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
Continuing our discussion from the November issue of Design007 Magazine on proper plane design, Kris Moyer, an instructor for the Global Electronics Association, shares techniques he teaches his PCB design students to use.
Kris, you spend time on plane design in your advanced design classes. What topics do you focus on, and why is plane design so important?
Kris Moyer: When it comes to plane design, there are several challenges with modern high-speed designs. Planes, or more specifically, mirror/return paths, are critical to proper controlled impedance transmission line design. Additionally, to mitigate high-speed switching “noise,” the use of planar capacitance is now necessary and critical. A significant amount of the “noise” seen on the power and return lines of the digital signals is the result of the Vcc/Ground bounce. These bounces, in turn, are typically the result of the parasitic inductance of the digital devices’ Vcc and GND pins.
As a digital signal changes state from 0-1 or 1-0, there is a momentary demand for increased current from the power rails. This demand needs to be supplied during the transition period. The rate at which current can be supplied is dependent on the resistance (R), inductance (L), and capacitance (C) of the component leads, component values, and trace/transmission line impedance.
Due to the ever-increasing speed/decreasing time of the digital transition, the time delay of the R/L/C of the leads/devices is greater than the total transition time. This means that the classic method of adding a capacitor to the power pins of the digital devices is no longer effective for this instantaneous switching current. This is primarily due to the parasitic inductance (L) of the device leads, and the total capacitance of the power supply must still be considered in the design; therefore, physical capacitors must be included in the design. A capacitor made from a pair of planes, either using dedicated embedded capacitance material or standard PCB material, is the only device in the design with sufficiently low parasitic inductance to respond quickly enough to meet this new, extremely fast switching current demand.
To continue reading this article, which originally appeared in the January 2026 issue of I-Connect007 Magazine, click here.
Share on:
Testimonial
"Your magazines are a great platform for people to exchange knowledge. Thank you for the work that you do."
Simon Khesin - Schmoll MaschinenSuggested Items
IBM, Dallara to Advance AI and Quantum-Powered Design for High-Performance Vehicles
05/01/2026 | IBMIBM and the Dallara Group, a world-leading racing and high-performance vehicle manufacturer, announced a collaboration to advance vehicle design and optimization using AI and explore the use of quantum computing.
SEMI ESD Alliance 2026 Outlook: Agentic AI to Transform Chip Design and Verification
05/01/2026 | SEMIThe Electronic System Design Alliance (ESD Alliance), a SEMI Technology Community, announced its annual Executive Outlook event for semiconductor EDA, agentic AI and IP company executives.
EMAC Returns with Bright Electronics Manufacturing Challenge 2026
04/30/2026 | SMTAThe Electronics Manufacturing & Assembly Collaborative (EMAC) has announced the return of the Bright Electronics Manufacturing Challenge 2026, an immersive, hands-on student competition that puts real electronics manufacturing experience into the hands of the next generation of engineers.
A Designer's Focus on High Density
04/30/2026 | Marcy LaRont, I-Connect007 MagazineVern Solberg is a distinguished member of the Global Electronics Association Raymond E. Pritchard Hall of Fame and has served as chair or vice chair of many committees, developing technical standards and implementation guidelines, including the IPC-7090 series, which focuses on design for manufacturing and reliability for electronic assemblies. He’s a long-time contributor to Design007 Magazine, and he conducted a half-day tutorial at APEX EXPO 2026, where he addressed 2D, 2.5D, and 3D packaging and ultra-high density hybrid bond interconnect. I caught up with Vern at the show and asked about his pivot from addressing more standard design challenges to his focus on high-density circuits.
Zuken Launches GENESYS 2026 to Broaden Access and Improve MBSE Workflows
04/28/2026 | ZukenZuken announced GENESYS 2026, the latest version of its model-based systems engineering platform, with updates designed to improve performance, expand access to model-based information, and enhance the day-to-day modeling experience for engineering teams.