It’s Only Common Sense: Customers Capabilities—and Confidence
Marcy’s Musings: Operating Without a Rulebook
Beyond the Board: How a Diminished Supplier Base Affects Complex PCB Manufacturing Readiness in Defense
Siemens Collaborates with TSMC to Advance AI for Semiconductor Design
April 22, 2026 | SiemensEstimated reading time: 3 minutes
Siemens announced the continuation of collaboration with TSMC to drive innovation in AI-powered automation and advanced semiconductor design enablement. Building on the prior partnership achievements, Siemens is expanding support across the EDA workflow - from automated fixing of design rule violation to certified solutions for leading-edge process technologies.
“Our continued collaboration with TSMC exemplifies Siemens’ commitment to delivering AI-driven automation and advanced semiconductor design capabilities that accelerate our customers’ ability to innovate at the most advanced process nodes,” said Ankur Gupta, executive vice president, EDA IC Software, Siemens Digital Industries Software. “By combining our AI innovations with TSMC’s leading-edge process technologies, we’re helping customers reach new levels of speed, accuracy and design confidence.”
“TSMC greatly values our longstanding partnership with Siemens, a key member of our Open Innovation Platform® (OIP) ecosystem, as we work together to enable next generation semiconductor designs,” said Aveek Sarkar, director of the ecosystem and alliance management division at TSMC. “Through joint advancements in AI-powered EDA tools and certified design enablement, we continue to help customers achieve exceptional results on our latest technologies while driving energy-efficient chip innovation, paving the way for advancements in the semiconductor industry during this transformative era of AI.”
AI-powered chip design solution
Siemens is collaborating with TSMC to advance AI-powered automation across EDA workflows using the recently launched Fuse™ EDA AI System, a comprehensive domain-scoped agentic AI system for semiconductor. Through this collaboration, TSMC is working with Siemens to enhance productivity in custom integrated circuit (IC) design to enable multi-step, multi-tool automations for DRC-centric physical verification with Siemens’ Calibre® software, and to help designers quickly access design information, receive guided recommendations and have real-time command execution to accelerate digital design cycles with Siemens’ Aprisa™ software.
3D IC design solution and TSMC 3DFabric
For TSMC 3DFabric® technologies, Calibre 3DStack supports the interface check flow for alignment and connectivity verification, the inter-chiplet DRC flow for performing 3D-aware DRC validation on the interposers, the inter-chiplet antenna flow for performing antenna analysis on 3D systems and the 3DPERC flow for performing point-to-point (P2P) resistance extraction and current density analysis on 3D systems. These flows are supported in the 3Dblox syntax.
Calibre 3DThermal supports evaluation of thermal impacts on die level designs in the context of 3D IC stacking and has achieved TSMC certification for both static and transient thermal analysis. This means designers can analyze thermal impacts on complex 3D IC products along with complex power deliveries using Calibre 3DThermal to make informed design decisions.
Advanced node technology enablement
Siemens and TSMC are also collaborating on the next generation process node enablement. Siemens’ Calibre nmPlatform software has achieved certification for TSMC’s 3nm, 2nm, A16 and A14 process technologies. The Solido Simulation Suite software is also now certified for SPICE accuracy in TSMC’s N3A, N2P, A16 and A14 process technologies, enabling customers to create and reliably verify analog, mixed-signal, RF, standard cell, and memory designs using advanced TSMC nodes. This collaboration expands into TSMC’s custom design reference flow (CDRF) on its A14 process, as Siemens’ Solido Simulation Suite supports reliability aware simulation technology, which addresses IC aging, real-time self-heating, and Safe Operation Area (SOA) checks. Further, TSMC’s custom design reference flow (CDRF) for its A14 process incorporates Solido Design Environment for advanced variation-aware verification, enhancing design sensitivity and automated cell optimization.
Siemens’ mPower analog is certified for transistor-level EM/IR sign-off for TSMC’s N2P process, underscoring its readiness to support customers’ next-generation designs on TSMC’s advanced nodes. Siemens’ Aprisa software for digital implementation has achieved TSMC N2P Integrated Tool Certification which demonstrates readiness to support advanced node design implementation flow.
Additionally, Siemens tools have been enabled to support customers in the design, implementation, and verification of TSMC Compact Universal Photonic Engine (TSMC-COUPE™) technology. The companies’ joint activity on silicon photonics includes flow development using Siemens’ Innovator3D IC™ software, Calibre 3DStack software, L-Edit software, Solido Simulation Suite software and Calibre Interactive software for design, implementation, and verification of TSMC-COUPE™ technology.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
PCB Technologies to Exhibit at PCB East 2026
04/23/2026 | PCB Technologies Ltd.Issey Ende, PCB-Technolgies’ VP of Sales and Marketinghas announced that his company will be exhibiting at this year’s PCB East 2026, the premier East Coast conference and exhibition for the electronics design, fabrication, and assembly industry on Wednesday, April 29, 2026, at the DCU Convention Center in Worcester, Massachusetts.
Changing Times: Siemens Plans to Sell Former Mentor Graphics Wilsonville Campus
04/22/2026 | Nolan Johnson, I-Connect007Siemens announced it will be selling its Wilsonville, Oregon, property, which has served as the campus for Mentor Graphics, which was later acquired by German EDA-giant Siemens, as reported by The Oregonian on April 20. Siemens will maintain one building on the sprawling 53-acre campus, citing the move to hybrid and remote work over the past few years as a key factor in the decision.
Standardization, Workforce, and the Road Ahead for Flex–Packaging Integration, Part 3
04/22/2026 | Anaya Vardya, American Standard CircuitsParts 1 and 2 of this series established the technical foundation and application landscape for the convergence of flexible PCBs and advanced semiconductor packaging. Part 3 addresses what comes next: the standards frameworks, talent pipelines, and strategic imperatives that will determine whether the industry can scale this convergence reliably and competitively.
ACCM Unveils Negative and Near-zero CTE Materials for Large-Format AI Chips
04/21/2026 | Advanced Chip and Circuit MaterialsAdvanced Chip and Circuit Materials, Inc. (ACCM) has launched two new materials: Celeritas HM50, with a negative coefficient of thermal expansion (CTE) of -8 ppm/°C to offset the positive CTE and expansion of copper with temperature on circuit boards, and Celeritas HM001, with near-zero CTE and the low-loss performance needed for high-speed signal layers to 224 Gb/s and faster in artificial intelligence (AI) circuits.
FlashPCB Names Matthew Belknap Production Manager as Operations Continue to Ramp
04/21/2026 | FlashPCBFlashPCB, a leading provider of quick-turn PCB assembly, has promoted Matthew Belknap to Production Manager, following his recent start with the company earlier this year.