Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Advanced Electronics Packaging Digest

Subscribe

Stay ahead of the technologies shaping the future of electronics with our latest newsletter, Advanced Electronics Packaging Digest. Get expert insights on advanced packaging, materials, and system-level innovation, delivered straight to your inbox.

Subscribe now to stay informed, competitive, and connected.

Suggested Items

Kioxia, Sandisk Develop Highest-Density 3D QLC NAND

08/06/2026 | BUSINESS WIRE
Future of Memory and Storage Conference (FMS) – Kioxia Corporation, a subsidiary of Kioxia Holdings Corporation and Sandisk Corporation unveiled their next-generation Quad-Level-Cell (QLC) 3D flash memory technology, which delivers up to 60% increase in bit density compared to their 8th-generation, surpassing 37 Gb/mm² and setting the industry benchmark1 for bit density, performance and power efficiency.

NAND Flash Supply Growth to Outpace Demand in 2027, Easing Supply Constraints in 2H27

07/21/2026 | TrendForce
TrendForce’s monthly July NAND Flash update reveals that the NAND Flash market has remained undersupplied throughout 2026, driven by surging AI-related demand and limited capacity expansion.

NOR Flash, SLC NAND Prices Surge Over 100% in 1H26, Shortages to Persist in 2H26

06/16/2026 | TrendForce
Major memory suppliers continue to prioritize capacity allocation toward higher-value products such as HBM and advanced-layer 3D NAND, according to TrendForce’s latest research on the memory industry.

The Chemical Connection: The Consequences of Additive Metallizing on Etching Steps

06/01/2026 | Don Ball -- Column: The Chemical Connection
This month, I’m taking another look at additive manufacturing. What does mSAP, SAP, and additive metallizing (plating) look like in today’s advanced PCB fabrication? I must confess I don’t have a lot of insight, as my whole career has been devoted to removing copper from panel surfaces in even and controlled ways, and not to putting copper back on the panel. However, at some point in the additive process, especially in additive plating, copper must be removed from between the conducting surfaces to complete the circuits. Here, I can address some of the consequences of additive metallizing on subsequent etching steps.

Combined Revenue of Top Five Global NAND Flash Suppliers Rose by 83.7% QoQ for 1Q26

05/25/2026 | TrendForce
According to TrendForce’s latest survey of the NAND Flash industry, CSPs worldwide experienced an exponential surge in demand for enterprise SSDs in 1Q26 due to the need for high-speed data transmission and the massive data storage capacities required to build out AI server infrastructure.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in