-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Estimated reading time: 1 minute

The Short Scoop: Why the Customer-Stencil Manufacturer Relationship Matters in 2014
When SMT Magazine editors asked their columnists to think ahead and discuss the technologies and changes that will lead the way in our field in 2014, my thoughts and predictions naturally turn to stencils.
The stencil market has certainly changed over the past few years, but the main change isn’t with products and technologies--although there have been several innovations in products and their accompanying technologies. The big change is in the customer-stencil manufacturer relationship, requirements, and expectations. As recently as a few years ago, the majority of the relationship between a stencil manufacturer and the customer was purely focused on delivering the stencil. For many years, stencil applications were relatively standard, boards were populated with standard components, and the types of conductive materials being printed didn’t vary much. On the stencil side, there were basic laser cut stencils and high-end electroform stencils; but the wide selection of stencil types, materials used to manufacture stencils, and coatings used today didn’t exist.
What I see as more acute now is the increasing requirement for stencil manufacturers to be more focused on customer support, technical and application support, technical aptitude, and equipment and manufacturing quality capabilities. The industry is driving suppliers to offer a wider than ever variety of solutions to fit current and future applications. Read the full column here.
Editor's Note: This column originally appeared in the December 2013 issue of SMT Magazine.
More Columns from The Short Scoop
Adapting Stencils to Manufacturing Challenges in 2015The Short Scoop: Stencil Printing in PCB Cavities
The Short Scoop: Printing Two-level PCBs in One Step with a 3D Electroform Stencil
The Short Scoop: Improving Stencil Printing Results
The Short Scoop: More Stencil Questions (and the Answers!)
The Short Scoop: Selecting a Stencil Frame
The Short Scoop: Screen Printing Solutions for Small Die & Precision
The Short Scoop: 10 Common Stencil Questions